null

Brisa Trapper 95 Blade, Flat Grind, ELMAX steel

(1 review) Write a Review
Gift wrapping:
Options available
  • Brisa Trapper 95 Blade, Flat Grind, ELMAX steel
  • Brisa Trapper 95 Blade, Flat Grind, ELMAX steel
  • Brisa Trapper 95 Blade, Flat Grind, ELMAX steel
  • Brisa Trapper 95 Blade, Flat Grind, ELMAX steel
  • Brisa Trapper 95 Blade, Flat Grind, ELMAX steel
  • Brisa Trapper 95 Blade, Flat Grind, ELMAX steel
  • Brisa Trapper 95 Blade, Flat Grind, ELMAX steel
  • Brisa Trapper 95 Blade, Flat Grind, ELMAX steel
$139.00

Description

EnZo Trapper 95 Blade, Flat Grind, Stainless Steel (ELMAX)

This is the ELMAX "super steel" version of the high-quality Trapper blade, with the full Flat Grind.

The "Trapper" blade from EnZo is a very sharp, Finish blade with great edge geometry for cutting.

The blade is about 3.6 mm thick, about 25 mm wide and has about 95 mm of blade.

The blade is in ELMAX , the powder-based "super steel" from Swedish manufacturer Uddeholm AB. Traditionally very high edge retention and corrosion resistance were hard to achieve in the same steel. In the manufacturer's own words:

"Uddeholm Elmax SuperClean is a high chromium-vanadium-molybdenum-alloyed steel with the following characteristics:

  • High wear resistance
  • High compressive strength
  • Corrosion resistant
  • Very good dimensional stability

High wear resistance is normally connected to low corrosion resistance and vice versa. In Uddeholm Elmax SuperClean it has however been able to achieve this unique combination of properties by"

Holes are  2 x 4,6 mm , 1 x 6,3 mm, medium corby bolts are a good fit (1/4").

 

 

 

View AllClose

1 Review

  • 4
    Did not have time to assemble the knife yet

    Posted by Joe kiss on 31st Oct 2020

    For a non custom knife its an excellent value. This is one of the best steel you can get .

View AllClose