unbranded
Mosaic Pin 604, 6 mm (carbon fibre)
- Gift wrapping:
- Options available
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
| Buy 3 or above | and pay only $29.00 each |
Description
6 mm Mosaic Pin in Brass and Steel in Carbon Fibre tube (6 mm diameter x 130 mm)
Clean, good looking pattern Mosaic pin for knife handles consisting of an outer tube filled with smaller rods and black epoxy.
Drill a hole through handle and attach a short length with epoxy, sticking out a couple of mm on each side.
When the epoxy is set, grind off flush with the handle using a file or belt sander.
These are 130 mm long, and outer diameter is 6 mm.
Related Products
unbranded
Mosaic Pin 707, 7 mm (carbon fibre tube)
$40.00
7 mm Mosaic Pin in Brass and Steel and carbon fibre (7 mm diameter x 130 mm) Clean, good looking pattern Mosaic pin for knife handles consisting of an outer tube filled
$40.00
Mosaic Pin 610, 6 mm
$29.00
6 mm Mosaic Pin (6 x 130 mm) Clean, good looking pattern Mosaic pin for knife handles. Drill a hole through handle and attach a short length with epoxy, sticking out a couple of mm on each side. When...
$29.00
unbranded
Mosaic Pin 608, 6 mm
$29.00
6 mm Mosaic Pin in Brass and Steel (6 mm diameter x 130 mm) *Steel outer tube* Clean, good looking pattern Mosaic pin for knife handles consisting of an outer tube filled with smaller rods and black...
$29.00
Mosaic Pin 602, 6 mm
$29.00
6 mm Mosaic Pin (6 x 130 mm) Clean, good looking pattern Mosaic pin for knife handles. Drill a hole through handle and attach a short length with epoxy, sticking out a couple of mm on each side. When...
$29.00
unbranded
Mosaic Pin 706, 7 mm
$35.00
7 mm Mosaic Pin in Brass and Steel (7 mm diameter x 130 mm) Clean, good looking pattern Mosaic pin for knife handles consisting of an outer tube filled with smaller rods and black epoxy. Drill a hole...
$35.00