Spare Carbides for the File Guides

(1 review) Write a Review
Gift wrapping:
Options available
Calculated at Checkout
  • Spare Carbides for the File Guides


Replacement Carbide Strips for the Knife Makers File Guide (v5)

  • 80 x 10 x 3.9 mm carbide strips
  • 2 x holes counter-sunk for M4 machines screws
  • Hardened to 78 HRC

One set of 2 carbide strips.

These fit the "V4" and "v5" of the file guides, the type with screw-on carbides. 

Custom molded for the file guide, these screw on to the file guide body.

The carbides are very hard and should with normal use last for many years.

If they are used with diamond tools or ceramic belts if using a grinder, they can wear.

These are replacements strips, using the original screws that came with the file guide.

View AllClose

1 Review

  • 5

    Posted by Andy on 21st Dec 2021

    These are great. I didn't want to buy a file guide but did want to make one. I just needed a good wear surface. The carbides are perfect

View AllClose