Drop point Hunter With Steel Guard
- Gift wrapping:
- Options available
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
| Buy 3 or above | and pay only $72.00 each |
Description
Drop Point Hunter Blade With Steel Guard
Blade is 4.7 mm thick, 30 mm wide, and about 100 mm long with a stainless guard already fitted.Total length of this strong full tang blade is about 210 mm.
The Drop Point Hunter is a great full tang hunting kit design. The blade is made from 440A Stainless and the pre-attached guard is made from 420 stainless steel. It comes hollow ground, satin finished and is ready for handle scales and 1/8" or 4 mm pins.
tang has 1 pre-drilled .200" inch hole in it for handle fastening.
This blade comes in a well presenting gift box, and is produced in China.
Related Products
Damascus Hunter, Carbon Steels
$169.00
Damascus Hunter, 416 layers Fulltang, Made in USA This beautiful carry-sized hunting knife blade is a carbon steel damascus f
$169.00
Solingen
Bowie Guard, Steel
$29.00
Bowie Guard, Steel Brass guard for the Texas Bowie blade, this guard is 55 x 18 mm x 4 mm. The hole is about 11 x 5 mm and the ends are turned up.
$29.00
Clip Point Hunter Kit with Curly Birch Handle block
$89.00
Clip Point Hunter Kit with Curly Birch handle block The Clip Point Hunter comes hollow ground, satin finished and has a pre-pinned brass finger guard attached
$89.00
Polar
Polar Long Hunter 145, Stainless Steel
$69.00
Polar 145 blade, Stainless Steel Stainless Steel blade, with a Nordic hunter/skinner profile in an extra long blade. This blade is both longer and wider than most traditional Scandi blades,...
$69.00
Persian Fulltang Blade (steel guard)
$79.00
Persian Fulltang Blade Blade. (with steel guard) Blade is 4.3 mm thick, 34 mm wide, and about 125 mm long with a steel guard already fitted.Total length of this str
$79.00
CKK
Clip Point Scout, Stainless Steel
$48.00
Clip Point Scout with Steel Guard (85 mm blade) The newly redesigned Clip Point Scout is a hidden tang design that is modeled around the half-ta
$48.00
Out of stock
Stainless Steel Guard Block, 200 mm (25 x 10 mm)
$25.00
Stainless Steel Guard Block (200 x 25 x 10 mm) Solid piece of 316 grade stainless steel used to make knife guards or bolsters, as well as end or butt caps. Machines freely and takes a great polish...
$25.00
Guard Brass - Excalibur
$19.00
Guard Brass - Excalibur Precision laser cut 5mm thick guard knife bolster. Size: 5x19x61mmHole: 3x18mm
$19.00