Handle Pins And Bolts

Carbon Fibre Rod & Tubes Carbon fibre rod or pin stock, for using with carbon fibre scalesblack in colour See options for diameter x length of the solid rod or hollow tube. Lanyard tube 5 mm is 4 mm internal diameter, 5 mm outer diameter.

G10 Pins for handles (1/8" or 1/4" or 3/16" ) Select colour and diameter in options G10 pin for using in knife handles, this is for one pin of length approx 300 mm and with a diameter of 1/8" (approx 3.15 mm) or 1/4" (approx 6.35 mm) The 3/16" (4.76 mm)...

White G10 lanyard tube for handles (1/4" x 250 mm ) White G10 pin for using in knife handles, this is for one pin of length approx 250 mm and with a diameter of 1/4" G10 is a strong material, related to fiberglass.     

Black G10 lanyard tube for handles (1/4" x 250 mm ) Black G10 pin for using in knife handles, this is for one pin of length approx 250 mm and with a diameter of 1/4" G10 is a strong material, related to fiberglass.     

Corby Bolt, Copper (1/4", 6.35 mm) Medium size corby bolt in copper, for securing handle scales to full-tang knife blades. These are often used in addition to epoxy glue, for both looks and additional attachment strength of the handle scales. The bolt...

Stainless Steel 3/16" for handle pins (4.76 x 200 mm ) Stainless steel pin for using in knife handles, this is for one pin of length approx 200 mm and with a diameter of 3/16" (4.76 mm). 316 is a highly corrosive resistance alloy good for pins and...

Stainless Steel Lanyard Tube, 1/4" (NOTE SHORT LENGTH 13 mm) Size is 1/4", 6.35 mm as outer diameter. Length 13 mm, inner diameter 4.95 mm for thin, small knives only. Set of 2 small tubes

Copper Pin, 3/16" for handle pins (4.76 x 200 mm ) Copper pin for using in knife handles, this is for one pin of length approx 200 mm and with a diameter of 3/16" (4.76 mm). Using pins is a faster, easier alternative to corby bolts, resulting in the same...

Brass Pin, 3/16" for handle pins (4.76 x 200 mm ) Brass  pin for using in knife handles, this is for one pin of length approx 200 mm and with a diameter of 3/16" (4.76 mm). Using pins is a faster, easier alternative to corby bolts, resulting in the...

Loveless bolts 1/4" (6.35 mm) - pack of 5 Strong way to attach scales to fulltang knife blades. Bolt is Stainless Steel with brass cylinders as "nuts". Adjusts for handle width, epoxy thread and nut for extra strength, screw in screw. When epoxy has...

Loveless bolts 5/16" (8 mm) - pack of 5 Strong way to attach scales to fulltang knife blades. Bolt is Stainless Steel with brass cylinders as "nuts". Adjusts for handle width, epoxy thread and nut for extra strength, screw in screw. When epoxy has...

Cutlers Rivets x 10  Fits instead of 1/4" corby bolts in for instance the EnZo handle scales. length total open 30 mm, closed 18 mmdiameter: 4.5 mm (hole through the blade)head diameter: 7 mm (counter-sunk hole in scales, like for 1/4" bolts)head...

Copper Pin, 1/4" for handle pins (6.35 x 145 mm ) Copper pin for using in knife handles, this is for one pin of length approx 145 mm and with a diameter of 1/4" (6.35 mm). Using pins is a faster, easier alternative to corby bolts, resulting in the same...

Stainless Steel Lanyard Tube, 1/4" for handle pins (6.35 x 145 mm ) Steel lanyard tube for using in knife handles, this is for one pin of length approx 145 mm and with a outside diameter of 1/4" (6.35 mm). These have a thicker wall than the brass lanyard...

Brass Lanyard Tube, 1/4" for handle pins (6.35 x 145 mm ) Brass lanyard tube for using in knife handles, this is for one pin of length approx 145 mm and with a outside diameter of 1/4" (6.35 mm). Brass is an easy to work material, and takes a great shine...

Brass Handle Pin, 1/8" (3.2 mm x 280 mm) Brass solid pin for using in knife handles, this is for one pin of length approx 28 cm and with a diameter of 1/8". 416 is a grade of stainless steel that is freely machinable, meaning it is easy to work and...

Stainless Steel Pin, 1/4" for handle pins (6.35 x 145 mm ) 316 Grade Stainless Steel  pin for using in knife handles, this is for one pin of length approx 145 mm and with a diameter of 1/4" (6.35 mm). Using pins is a faster, easier alternative to...

Brass Lanyard Tube, 1/4" For EnZo blades, lanyard tube for knife making. Size is 1/4", 6.35 mm as outer diameter. Length 22 mm, inner diameter 4.9 mm. Both outside and inside edges of the tube is chamfered. these are the ones used in for instance the...

Copper Pin, 1/8"  Copper pin for using in knife handles, this is for one pin of length approx 28 cm and with a diameter of 1/8". Copper is an easy to work material, and takes a great shine. Drill a 1/8" (3.2 mm) hole in the handle block or scales,...

Brass Pin, 1/4" for handle pins (6.35 x 145 mm ) Brass  pin for using in knife handles, this is for one pin of length approx 145 mm and with a diameter of 1/4" (6.35 mm). Using pins is a faster, easier alternative to corby bolts, resulting in the...

316 Stainless Steel Pin, 1/8"  Stainless Steel pin for using in knife handles, this is for one pin of length approx 28 cm and with a diameter of 1/8". 316 is a highly corrosive resistance alloy good for pins and fittings, the same as the guard...

Corby Bolt, Stainless Steel (1/4", 6.5 mm) Medium size corby bolt in steel, for securing handle scales to full-tang knife blades. These are often used in addition to epoxy glue, for both looks and additional attachment strength of the handle scales. The...

Corby Bolt, Brass (1/4", 6.35 mm) Medium size corby bolt in brass, for securing handle scales to full-tang knife blades. These are often used in addition to epoxy glue, for both looks and additional attachment strength of the handle scales. The bolt has...