Leather for sheaths, veg tanned 200 x 250 mm
- Gift wrapping:
- Options available
Description
Vegetable Tanned Leather for Sheath, 20 x 25 cm
Vegetable tanned shoulder leather, approx 3 mm thick.
These pieces are cut into 20 x 25 cm (minimum) size and will be enough for one or maybe 2 small sheaths.
This leather is normal tooling leather ( not half-tanned) and will stay softer and more pliable.
The leather should be sealed and can be dyed and tooled with great results.
The sheath can be made by folding the leather around the finished knife, and using contact cement to glue it up.
Then punch holes with an awl (or drill holes) and sow the sheath together before cutting off the excess leather and dying it.
The belt loop is either attached from a separate strip, or made as part of the sheath and folded back behind the sheath and sown on.
This example is using half-tanned leather but the process is the same:
4 Reviews
-
Sheath leather
A nice piece of leather. I made my first sheath with it, and my wife said it was good enough to sell.
-
Leather
Prompt service good product will definitely purchase from creative man again
-
Leather for Sheath making
Good quality product
-
Great piece of leather
Great quality leather, did my first leather work, easy work able and beautiful color. Made two sheaths and a belt knife and pen holder.
Related Products
Mahogany leather for sheaths, veg tanned 200 x 250 mm
Brandy Leather for sheaths, veg tanned 200 x 250 mm
Sienna Leather for sheaths, veg tanned 200 x 250 mm
Leather for sheaths, veg tanned 300 x 600 mm
