Birch Bark Handle stack 12 x 35 x 110 mm (1 piece)
- Gift wrapping:
- Options available
On Sale
Description
Birch Bark Handle Inlay Block *Not enough for a full handle*
Layers of dried birch bark flattened and glued together, about 12-15 mm high.
The block is 35 mm wide and about 110 mm long. Pieces of this can be used as parts of a stick-tang handle, this is not enough for a whole knife handle in itself.
Note this is a single piece.
1 Review
-
Great product!!
Love it, makes birch bark handles so much quicker and easier!
Related Products
Out of stock
Spacer material, Nickel Silver 40 x 40 x 1 mm
$6.00
Nickel Silver plate, 1 mm thick Nickel Silver spacer material, min 4x4 cm in size. These are stamped out and will need to be hammered flat before use. Drill a hole for the tang and insert these as...
$6.00
Spacer Material, Copper 40 x 40 x 1 mm
$6.00
Copper plate, 1 mm thick (40 x 40 mm) Copper spacer material, min 4x4 cm in size. These are cut out and may need to be hammered flat before use. Drill a hole for the tang and insert these as...
$6.00
Out of stock
Spacer material, Brass 40 x 40 x 1 mm
$10.00
Brass plate, 1 mm thick Brass spacer material, min 4x4 cm in size. These are stamped out and will need to be hammered flat before use. Drill a hole for the tang and insert these as spacers in between...
$10.00
G10 Orange Spacer Sheet 1 x 120 x 240 mm
$15.00
Red G10 Spacers 1 mm thick, sheet of 120 x 240 mm Super strong G10 handle spacers in 1 mm thickness, sheet of 120 x 240 mm. G-10 is much harder to cut and work than Micarta and as with any handle...
$15.00
Out of stock
G10 White Spacer Sheet 1 x 120 x 240 mm
$15.00
Red G10 Spacers 1 mm thick, sheet of 120 x 240 mm Super strong G10 handle spacers in 1 mm thickness, sheet of 120 x 240 mm. G-10 is much harder to cut and work than Micarta and as with any handle...
$15.00