Brass pin for handles, 1/4"
- Gift wrapping:
- Options available
- Calculated at Checkout
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
|Buy 3 or above||and pay only $6.00 each|
Brass Pin, 1/4" for handle pins (6.35 x 145 mm )
Brass pin for using in knife handles, this is for one pin of length approx 145 mm and with a diameter of 1/4" (6.35 mm).
Using pins is a faster, easier alternative to corby bolts, resulting in the exact same look.
Brass is an easy to work material, and takes a great shine.
Drill a 1/4" (6.35 mm) hole in the handle block or scales, lightly sand the pin until it can be gently tapped in.
Then glue into handle block or scales when gluing together the knife.
Example of a knife showing brass lanyard hole at the rear and 1/4" brass corby bolt near the blade, the brass pins give the exact same look at the Corby bolts. Without requiring counter-drilling the scales.
As per normal everything is exactly what I wanted and postage is so quick thank you all
Well machined and accurate lengths that polish easily.
Great stock, used more than once, prompt delivery