15N20 Nickel Steel for Damascus
- Gift wrapping:
- Options available
Description
15N20 Nickel Carbon steel
15N20 is popular with makers of damascus due to high nickel content of 2.0% which resist the etch and leaves shiny layers.
The steel IS NOT annealed and harder to work than our other carbon steels.
15N20 is a blade steel on it's own, bascially 1075 with nickel added but is usually combined with a carbon steel like 1084 into damascus over being used as-is. The nickel makes the steel tougher than "plain" 1075.
Related Products
Out of stock
Damascus Hunter, Carbon Steels
$169.00
Damascus Hunter, 416 layers Fulltang, Made in USA This beautiful carry-sized hunting knife blade is a carbon steel damascus f
$169.00
Damascus Bushido Tanto, Carbon Steels
$159.00
Damascus Bushido Tanto, 416 layers Fulltang, Made in USA Beautiful scaled-down Tanto blade 22 mm high, note blade length is 82.5 mm and total length is 185 mm. Blade
$159.00
How to: Heat Treat 1084, 1075 or 15N20 Carbon Steel
$0.00
How To Heat Treat Simple Carbon Steels: ** Recipe for 1084, 1075, 15N20 and 5160 ** The short version: Heat the steel to non-magnetic any way you can (815 C / 1500 F)
$0.00
Damascus Fire Ant Blade, Carbon Steels
$99.00
Damascus Fire Ant, 416 layers forge welded, Made in USA (75 mm blade) This h
$99.00
PlusYs
Sujihiki Blade 240, Stainless Damascus
$179.00
Sujihiki Blade 240, Stainless Steel Stainless Damascus Sujihiki Blade with 240 mm blade length, 2 mm thick and about 37 mm high. Hand hammered top section, "tsuchime" for better food release. Total...
$179.00