Brass pin for handles, 3/16"

Brass Pin, 3/16" for handle pins (4.76 x 200 mm )

Brass  pin for using in knife handles, this is for one pin of length approx 200 mm and with a diameter of 3/16" (4.76 mm).

Using pins is a faster, easier alternative to corby bolts, resulting in the exact same look.

Brass is an easy to work material, and takes a great shine.

Drill a 3/16" hole in the handle block or scales, lightly sand the pin until it can be gently tapped in.

Then glue into handle block or scales when gluing together the knife.