Stainless Steel pin for handles 3/16"
- Gift wrapping:
- Options available
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
| Buy 3 or above | and pay only $6.00 each |
Description
Stainless Steel 3/16" for handle pins (4.76 x 200 mm )
Stainless steel pin for using in knife handles, this is for one pin of length approx 200 mm and with a diameter of 3/16" (4.76 mm).
316 is a highly corrosive resistance alloy good for pins and fittings, the same as the guard blocks and a more corrosion resistant alloy than 416.
Using pins is a faster, easier alternative to corby bolts, resulting in the same look.
Related Products
Out of stock
Copper pin for handles 3/16"
$8.00
Copper Pin, 3/16" for handle pins (4.76 x 200 mm ) Copper pin for using in knife handles, this is for one pin of length approx 200 mm and with a diameter of 3/16" (4.76 mm). Using pins is a faster,...
$8.00
Brass pin for handles, 3/16"
$8.00
Brass Pin, 3/16" for handle pins (4.76 x 200 mm ) Brass pin for using in knife handles, this is for one pin of length approx 200 mm and with a diameter of 3/16" (4.76 mm). Using pins is a...
$8.00
Stainless Steel pin for handles, 1/4"
$8.00
Stainless Steel Pin, 1/4" for handle pins (6.35 x 145 mm ) 316 Grade Stainless Steel pin for using in knife handles, this is for one pin of length approx 145 mm and with a diameter of 1/4" (6...
$8.00
Stainless Steel pin for handles, 1/8"
$8.00
316 Stainless Steel Pin, 1/8" Stainless Steel pin for using in knife handles, this is for one pin of length approx 28 cm and with a diameter of 1/8". 316 is a highly corrosive resistance alloy...
$8.00