Brisa Trapper 115 Blade, SCANDI Grind, ELMAX steel

Brisa Trapper 115 Blade, Scandi Grind, Stainless Steel (ELMAX)

This is the ELMAX "super steel" version of the high-quality Trapper blade, with the scandi grind and longer 115 mm blade length.

The "Trapper" blade from EnZo Brisa is a very sharp, Finish blade with great edge geometry for cutting.

The blade is about 3.6 mm thick, about 26 mm wide and has about 115 mm of blade.

The blade is in ELMAX , the powder-based "super steel" from Swedish manufacturer Uddeholm AB. Traditionally very high edge retention and corrosion resistance were hard to achieve in the same steel. In the manufacturer's own words:

"Uddeholm Elmax SuperClean is a high chromium-vanadium-molybdenum-alloyed steel with the following characteristics:

• High wear resistance
• High compressive strength
• Corrosion resistant
• Very good dimensional stability

High wear resistance is normally connected to low corrosion resistance and vice versa. In Uddeholm Elmax SuperClean it has however been able to achieve this unique combination of properties by"

Holes are  2 x 4,6 mm (for 1/4" corby bolts) , 1 x 6,3 mm (for 1/4" lanyard tube)