Handle materials

Southern Silky Oak Wooden Knife Handle Scales Southern silky oak handle scales, set of 2 scales. Each scale is about 140 x 40 x 10 mm, dry and straight.  Due to the grain structure and distinct colouring, all scales are slightly different but...

Brass Pin, 1/4" for handle pins (6.35 x 145 mm ) Brass  pin for using in knife handles, this is for one pin of length approx 145 mm and with a diameter of 1/4" (6.35 mm). Using pins is a faster, easier alternative to corby bolts, resulting in the...

316 Stainless Steel Pin, 1/8"  Stainless Steel pin for using in knife handles, this is for one pin of length approx 28 cm and with a diameter of 1/8". 316 is a highly corrosive resistance alloy good for pins and fittings, the same as the guard...

Jarrah Wooden Knife Handle Scales  Jarrah (Eucalytpus marginata) is a large Australian hardwood tree with deep red heartwood and paler outer sapwood. It has an even, course grained structure with some fiddleback patterns, making it a popular...

Bolster R35, Brass (35 x 18 x 3 mm, slit 3 x 12 mm) Brass version of the bolster R35. Bolsters is an easy way to get a good looking fit between handle and blade. The handle piece can then have a bigger hole for the blade tang without this being...

Nickel Silver plate, 1 mm thick Nickel Silver spacer material, min 4x4 cm in size. These are stamped out and will need to be hammered flat before use. Drill a hole for the tang and insert these as spacers in between pieces of wood or other handle...

Brass plate, 1 mm thick Brass spacer material, min 4x4 cm in size. These are stamped out and will need to be hammered flat before use. Drill a hole for the tang and insert these as spacers in between pieces of wood or other handle material. These can...

Wenge Knife Handle Scales Set of 2 knife handle scales, from African Wenge. Wenge consists of 2 distinct textures of wood, layered on top of each other. The black layers are hard, and polishes up to a shiny surface. The cinnamon colored layers are softer...

Corby Bolt, Stainless Steel (1/4", 6.5 mm) Medium size corby bolt in steel, for securing handle scales to full-tang knife blades. These are often used in addition to epoxy glue, for both looks and additional attachment strength of the handle scales. The...

Corby Bolt, Brass (1/4", 6.35 mm) Medium size corby bolt in brass, for securing handle scales to full-tang knife blades. These are often used in addition to epoxy glue, for both looks and additional attachment strength of the handle scales. The bolt has...

Bolster R35, Nickel Silver (35 x 17 x 3 mm, slit 3 x 12 mm) Nickel Silver version of the bolster R35. Bolsters is an easy way to get a good looking fit between handle and blade. The handle piece can then have a bigger hole for the blade tang without...

Bolster R24, Nickel Silver Nickel Silver version of the bolster R24. The bolster is about 24 x 17 mm and 3 mm thick with a 2 mm slit. These are stamped out and most blade/bolster combinations will need some work to fit together. Filing the sides of...