Nordic Knife Design Korpi 90 Blade

Nordic Knife Design Korpi 90 Blade

NKD is the knife brand of Dennis Holmbacka from Finland, mixing old Finnish knife traditions with new advancements in steel and design. The result is a unique combination of quality blades made in proven steels, often mixing traditional blade shapes and grinds with modern tang construction, carry options and weight distribution. 

 (This is something as exciting as a Finnish Tommi blade but with a fulltang construction! I am super excited to see this one. Bjorn's comment)

This fulltang knife blade has the profile of the original Tommi puukko, and can be easily built with two scales and corby rivets. If you look for a challenge then use the pins holes, that enable for a more sophisticated version with brass bolsters at the ends.
The Tommi knife is one the most well know Finnish puukko models, developed in the area of Kainuu in the east of Finland around 1860.

Sandvik 14C28N® is a martensitic stainless chromium steel with a chemistry optimized for high quality professional knife applications. The chemical composition provides a unique combination of properties including:

• Excellent edge performance

• Very high hardness

• Good corrosion resistance

Sandvik 14C28N® is mainly recommended for knife applications which put very high demands on edge sharpness, edge stability and corrosion resistance.

Blade length: 90 mm

Width:19 mm

Thickness: 3.7 mm

Total Length: 203 mm

Holes: Corby: 2x4,7 mm , pin 4x 3.1 mm (for 2 x 1/4" corby bolts and optional 1/8" pin holes for bolsters)

Grind: Scandi Grind angle total: 23

Steel: Stainless Sandvik 14C28N HRC: 58-59

Steel composition: C 0.62 Cr 14 Mn 0.60 Si 0.2 N 0.11

Instructions for how to make your own handle: https://nordicedge.com.au/how-to-making-a-handle-for-the-nkd-beaver-70/