null

San Mai Billets: 1084, Nickel, Carbon 1020 (FORGING SIZE)

(No reviews yet) Write a Review
Gift wrapping:
Options available
  • San Mai Billets: 1084, Nickel, Carbon 1020 (FORGING SIZE)
  • blade is here only rough ground to do a sneaky test etch. This is forged from 1/3 of the billet.
  • San Mai Billets: 1084, Nickel, Carbon 1020 (FORGING SIZE)
  • example of a completed knife by Jerarmie Heywood of Oblivion blades. The cutting steel on this exact knife was another carbon steel but these steel billets look the same just with an easier to heat treat steel, being 1084.
  • San Mai Billets: 1084, Nickel, Carbon 1020 (FORGING SIZE)
  • blade is here only rough ground to do a sneaky test etch. This is forged from 1/3 of the billet.
  • San Mai Billets: 1084, Nickel, Carbon 1020 (FORGING SIZE)
  • example of a completed knife by Jerarmie Heywood of Oblivion blades. The cutting steel on this exact knife was another carbon steel but these steel billets look the same just with an easier to heat treat steel, being 1084.

Description

San Mai Billets from Oblivion Blades, Made in Australia

These are made to be forged, a thicker shorter version at 15 mm thickness.

The billets are made by Jerarmie Heywood from Oblivion Blades and consist of 1084 High Carbon steel as cutting edge in the middle with pure nickel and 1020 forge welded to the sides of the 1084. 

This creates a stunning looking blade when ground and etched.

As each is hand made they are different in size but weight is about the same, roughly 800-900 grams.

The size is about 175 mm in length, about 55 mm in width and approx 15 mm in thickness to be forged to final shape or thickness.

Jerarmie has made a name for himself with custom billets of Japanese steels clad with nickel and mild steel, these are a version of that with 1084 to make them easier to heat treat.

 

NOTICE: This is not a steel for beginners. There are no refunds for messing up these by forging them or heat treating them. This is a risky product for higher level makers who accept the risks involved in a product that consisting of high carbon steel, nickel and mild steel.. be warned.

 

Pro Tip: Don't grind these before heat treat. Flatten, profile but don't grind bevel. As the cheeks are not hardenable, there is no advantage to grinding profiles before heat treat. This only increases the chances of warping or issues during the heat treatment.

 

View AllClose