Ivan
6.3 mm (1/4") Eyelet Setter with Anvil
- Gift wrapping:
- Options available
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
| Buy 3 or above | and pay only $15.00 each |
2 Reviews
-
Well made
It does what it's supposed to do
-
Handy but not perfect
The anvil works ok, but the centre dimple is slightly oversized for 1/4 rivets. Just remember the anvil sits in the formed end of the rivet and the punch flares the unformed end, then it works just fine
Related Products
Ivan
4.2 mm (5/32") Eyelet Setter with Anvil
$19.00
Eyelet setter for 4.2 mm eyelets used in leather
$19.00
Kydex pro drill for 1/4" Eyelets
$39.00
Kydex Pro Drill bit for 1/4" eyelets and rivets Custom-made for perfect kydex sheath fittings, makes crisp and round holes removing the need to counter-sink. Kydex easily frays, this...
$39.00
Out of stock
Hot Cut Tool for Anvil, 1" shank
$55.00
Hot cut tool with 1" shank Anvil tool for blacksmithing. About 1" shank, cast steel tool. The hot cut is used to cut steel to length or width, as well as creating slits in hot steel. about 55 x 40 x...
$55.00
Bottom Block Tool for Anvil, 1" shank
$55.00
Bottom block tool with 1" shank Anvil tool for blacksmithing, may need some final filing or grinding to fit the anvil. About 1" shank, cast steel tool. about 50 x 50 mm face, 45 mm high. weights...
$55.00
Ivan
Basic Snap Setter, Leatherworking
$19.00
Basic Snap Setter for Leatherworking For glove snaps and other smaller leatherworking snaps. Consists of punching plate/anvil and 3 punches.
$19.00