null

84Engineering - Small Wheel Pair

(1 review) Write a Review
Gift wrapping:
Options available
  • Showing the 2 versions of the small wheel set
  • 84engineering small wheel set with the small wheels 1/4" and 1/2" or 6 mm and 13 mm diameter.
  • 84engineering small wheel set with the small wheels 3/4" and 1" or 20 mm and 25 mm diameter.
  • Shown with the OPTIONAL Small Wheel tooling arm with a 2" idler wheel for better belt angle. This is a special wheel material that can take the abrasive side of the belt much better than the standard drive wheels.
  • Shown with the OPTIONAL Small Wheel tooling arm with a 2" idler wheel for better belt angle. This is a special wheel material that can take the abrasive side of the belt much better than the standard drive wheels.
  • Showing the 2 versions of the small wheel set
  • 84engineering small wheel set with the small wheels 1/4" and 1/2" or 6 mm and 13 mm diameter.
  • 84engineering small wheel set with the small wheels 3/4" and 1" or 20 mm and 25 mm diameter.
  • Shown with the OPTIONAL Small Wheel tooling arm with a 2" idler wheel for better belt angle. This is a special wheel material that can take the abrasive side of the belt much better than the standard drive wheels.
  • Shown with the OPTIONAL Small Wheel tooling arm with a 2" idler wheel for better belt angle. This is a special wheel material that can take the abrasive side of the belt much better than the standard drive wheels.
$1,038.98

Description

84Engineering - Small Wheel Pair (one set, see options for sizes)

Replaces the flat platen on your 84Engineering grinder on that tooling arm, or even better - get the optional Small Wheel Tooling Arm with additional wheel that brings the belt down for a better angle.

The small wheel sets MUST be run at very slow speed, and are very useful for getting into small curves.

Made in Australia, the wheel sets come in 2 versions:

  • 1/4" and 1/2" (6 mm and 13 mm)
  • 3/4" and 1" (20 and 25 mm)

Note the photos are showing the optional tooling arm, the product itself is one set of small wheels without the tooling arm.

From Ewan and the team at 84Engineering:

84 Engineering small contact wheels are perfect for many tasks, from general shaping to the sharpening of serrated knives and pipe / tube notching. Due to their size, they are also great for grinding knife choils and deburring into tight radius corners.

The small wheels are available in a ¼” & ½” (6 & 13mm) pair and a ¾” & 1” (20mm & 25mm) pair. Our wheel pairs come in a CNC machined aluminium frame to ensure optimal bearing pre-load and maintain stable tracking / alignment.

The contact wheels are CNC machined from steel billet before being coated in a newly formulated urethane compound chosen specifically for its heat-resistance and durability. The wheels are then ground concentric for a perfectly smooth vibration-free grinding experience.

To get the most out of your 84 Engineering small wheels, we recommend using together with an 84 Engineering Small Wheel Arm and Small Wheel Rest.

*Please note, due to the size of small wheels they SHOULD NOT be run at full speed on variable speed grinders. On our Shop Mate 48" and Shop Master 72" belt grinder linishers they should only be run in the slow, green zone of your speed controller to avoid premature failure.*

We recommend the use of light backed belts / abrasives ( such as J-flex) with these small wheels as heavy X and Z  weight belts do not easily bend to such a tight radius.

 

 

 

 
View AllClose

1 Review

  • 5
    84 Engineering Small Wheel Pair

    Posted by Denis Wignell on 11th Mar 2024

    Very well made & functional. I bought the 1/4, 1/2" set & they are very good for getting into small radius areas.

View AllClose

Related Products