Blades
Blades are either "stick tang" or "full tang".
Stick tang is where the blade ends in a tang, that is fully enclosed by a handle material.
Like in samurai swords or Scandinavian knives.
Stick tang knives usually have a bolster between the blade and the handle, make sure you get the right one for the blade.
Full tang is where the steel of the blade is visible all the way around the handle.
And the handle consists of 2 scales, one scale/plate is attached to each side of the blade.
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Out of stock
MG French Serrated Blade 200, Stainless Steel
MG
$89.00MG Serrated Bread Knife Blade 200 mm Made in Spain, Stainless steel bread knife / serrated blade in the same series as the MG French Chef blades. "French" here refers to the style of knife with a flat edge area, not that these are made in France...$89.00 -
Mora L60, Carbon Steel
Mora
$59.00Mora L60 (Knife Blade No 120) Carbon Steel laminated blade, a short, sharp blade for good control. Mora blades are made in Mora,Sweden, the maker has over a century of history in making these blades. The blade is...$59.00 -
Helle Viking Blade, Carbon Steel
Helle
$69.00Helle Viking Knife Blade, Carbon Steel Helle has been making knives in the village of Holmdal on the west coast of Norway since the 1930s. After a bit of a rough start expanding outside of the village, things picked up when they started...$69.00 -
Bowl Carving Blade, Hand Made in Australia, Hillbilly Forge
Hillbilly Forge
$79.00Bowl Carving Blade, Hand Made in Australia (RIGHT Handed Blades) Carbon Steel blade in 1095 high-carbon tool steel, hand made by Jason at Hillbilly Forge in NSW. The blades are curved with a single sharp side, for carving bowls, cups and larger...$79.00 -
Spoon Carving Knife Blade Set, LEFT HANDED, Hand Made in Australia, Hillbilly Forge
Hillbilly Forge
$89.00Spoon Carving Knife Blade Set, Hand Made in Australia (LEFT Handed Blades) Carbon Steel blade in 1095 high-carbon tool steel, hand made by Jason at Hillbilly Forge in NSW. The blades are curved with a single sharp side, for carving spoons and cups...$89.00 -
Polar 80 Whittler Blade, Carbon Steel
Polar
$39.00Polar Whittler blade in Carbon Steel One of our best selling blades the Polar Whittler, in Carbon Steel. Great, sharp blade for whittling, camp chores and general use that holds a sharp edge. Blade is from Finland, made by Polar in 80CrV2 carbon steel...$39.00 -
Brisa Trapper 115 Blade, SCANDI Grind, ELMAX steel
Brisa
$159.00Brisa Trapper 115 Blade, Scandi Grind, Stainless Steel (ELMAX) This is the ELMAX "super steel" version of the high-quality Trapper blade, with the scandi grind and longer 115 mm blade length. The "Trapper" blade from EnZo Brisa is a very sharp, Finish...$159.00 -
Brisa Scara 60 Blade, RWL-34
Brisa
$119.00Brisa Scara 60 Blade, Flat Grind (RWL-34 Damasteel) from the Finnish team behind the Scara: "BRISA Scara 60 RWL comes in a limited edition. A three finger knife that serves you in any situation as a folding knife will do. Yet another great knife...$119.00 -
Brisa Froggy 70 Blade, 14C28N
Brisa
$65.00Brisa Froggy 70 Blade, Flat Grind (14C28N steel) The Brisa Froggy 70, a modern style versatile little EDC knife , designed especially for paracord or leather wrapping the handle. Also suitable as full tang conventional blade with 2 x 1/4" Corby bolts and...$65.00 -
SG4 Fixed Blade With Bolsters and Handle Pins
$109.00SG4 Blade, Stainless Steel Stainless blade in 440C steel in a gift box, with steel bolsters and steel handle pins included. All you need is a set of handle scales, to make your own handle. The flat ground blade is hardened, sharp and ready to go. ...$109.00 -
Persian Skinner Blade
$59.00Persian Skinner Blade. The Persian Skinner is a great trailing point skinner design. It is designed to fit a slip-over handle and can be finished with a single pin if desired. This is a great design project for that favorite stag antler you've...$59.00 -
Damascus Bushido Tanto, Carbon Steels
$159.00Damascus Bushido Tanto, 416 layers Fulltang, Made in USA Beautiful scaled-down Tanto blade 22 mm high, note blade length is 82.5 mm and total length is 185 mm. Blade thickness is 2.8 mm and the 3 holes will fit 1/8" pin stock but not quite 4 mm mosaic...$159.00