Handle materials

Jarrah Wooden Knife Handle Scales  Jarrah (Eucalytpus marginata) is a large Australian hardwood tree with deep red heartwood and paler outer sapwood. It has an even, course grained structure with some fiddleback patterns, making it a popular...

Bolster R35, Brass (35 x 18 x 3 mm, slit 3 x 12 mm) Brass version of the bolster R35. Bolsters is an easy way to get a good looking fit between handle and blade. The handle piece can then have a bigger hole for the blade tang without this being...

Nickel Silver plate, 1 mm thick Nickel Silver spacer material, min 4x4 cm in size. These are stamped out and will need to be hammered flat before use. Drill a hole for the tang and insert these as spacers in between pieces of wood or other handle...

Brass plate, 1 mm thick Brass spacer material, min 4x4 cm in size. These are stamped out and will need to be hammered flat before use. Drill a hole for the tang and insert these as spacers in between pieces of wood or other handle material. These can...

Wenge Knife Handle Scales Set of 2 knife handle scales, from African Wenge. Wenge consists of 2 distinct textures of wood, layered on top of each other. The black layers are hard, and polishes up to a shiny surface. The cinnamon colored layers are softer...

Corby Bolt, Stainless Steel (1/4", 6.5 mm) Medium size corby bolt in steel, for securing handle scales to full-tang knife blades. These are often used in addition to epoxy glue, for both looks and additional attachment strength of the handle scales. The...

Corby Bolt, Brass (1/4", 6.35 mm) Medium size corby bolt in brass, for securing handle scales to full-tang knife blades. These are often used in addition to epoxy glue, for both looks and additional attachment strength of the handle scales. The bolt has...

Bolster R35, Nickel Silver (35 x 17 x 3 mm, slit 3 x 12 mm) Nickel Silver version of the bolster R35. Bolsters is an easy way to get a good looking fit between handle and blade. The handle piece can then have a bigger hole for the blade tang without...

Bolster R24, Nickel Silver Nickel Silver version of the bolster R24. The bolster is about 24 x 17 mm and 3 mm thick with a 2 mm slit. These are stamped out and most blade/bolster combinations will need some work to fit together. Filing the sides of...

Curly Birch Wood Knife Scales x 2 pieces (Super Grade) Curly birch is a pale hardwood, growing only in a narrow, cold band north in Scandinavia and Russia. The "curly" in curly birch describes the twisted, curled grains. Curly birch has a solid texture...

Black Limba Wood Knife Block  Limba is a tropical tree from Western Africa, some of the wood has black stripes going through and this is referred to as "Black Limba". It is prized for its workability, excellent color and finish and is used in...

Wenge Wood knife block Wenge is a tropical African wood, consisting of 2 distinct layers. A hard, black layer and alternating cinnamon colored layers of softer wood. Wenge is heavy and hard and has been used in everything from buildings, custom guitars,...