Handle materials

G10 Spacers 1 mm thick, set of 2 Select colours in options, note bulk price when buying 3+ Super strong G10 handle spacers in 1 mm thickness, pre-cut to 40 x 120 mm size like most all of our handle scales. G-10 is much harder to cut and work than Micarta...

G10 Pins for handles (1/8" or 1/4" or 3/16" ) Select colour and diameter in options G10 pin for using in knife handles, this is for one pin of length approx 250-300 mm and with a diameter of 1/8" (approx 3.15 mm) or 1/4" (approx 6.35 mm) The 3/16" (4.76...

African Wenge and Maple Handle Block, pre-milled Handle blocks from two wood types, pre-milled for easier tang fitting to the blade. Grind or file the blade tang until it fits the existing hole in the block and glue it in with epoxy glue. A great way to...

Black Walnut and White Birch Handle Block, pre-milled Handle blocks from two wood types, pre-milled for easier tang fitting to the blade. Grind or file the blade tang until it fits the existing hole in the block and glue it in with epoxy glue. A great...

Maple and Ebony Handle Block, pre-milled Handle blocks from two wood types, pre-milled for easier tang fitting to the blade. Grind or file the blade tang until it fits the existing hole in the block and glue it in with epoxy glue. A great way to speed up...

HoneyComb Handle Scales with aluminium honeycomb core ( 8 x 40 x 120 mm, 2 scales) Purple in colour, one set of 2 scales. Each scale is approx 8 mm thick and 40 x 120 mm in size.  

Bright Blue G10 Spacers 1 mm thick, sheet of 120 x 240 mm Super strong G10 handle spacers in 1 mm thickness, sheet of 120 x 240 mm. G-10 is much harder to cut and work than Micarta and as with any handle material PPE is recommended but even more so with...

Santos Rosewood Handle scales x2    

Santos Rosewood Handle block      

6 mm Mosaic Pin (6 x 130 mm) Clean, good looking pattern Mosaic pin for knife handles. Drill a hole through handle and attach a short length with epoxy, sticking out a couple of mm on each side. When the epoxy is set, grind off flush with the handle...

6 mm Mosaic Pin (6 x 130 mm) Clean, good looking pattern Mosaic pin for knife handles. Drill a hole through handle and attach a short length with epoxy, sticking out a couple of mm on each side. When the epoxy is set, grind off flush with the handle...

5 mm Mosaic Pin (5 mm diameter x 130 mm) Clean, good looking pattern Mosaic pin for knife handles consisting of an outer tube filled with smaller rods and black epoxy. Drill a hole through handle and attach a short length with epoxy, sticking out a...