Description
Mora L82 (Knife Blade No 106)
Carbon Steel laminated blade, polished to a near mirror finish.
Mora blades are made in Mora,Sweden, the maker has over a century of history in making these blades.
The blade is made from carbon steel of high hardness laminated between sides of more flexible, softer steel.
This gives a very hard, sharp cutting edge (61 HRC), a strong flexible blade and allows for a thinner blade.
The blade blank is 2.5 mm thick, about 15 mm high and has about 82 mm of blade length.
Total length from tip to end of tang is 195 mm, the tang can be cut to fit the handle if required.
Mora blades are well known amongst bushcrafters and whittlers as good value, strong blades.
https://nordicedge.com.au/knife-kits/
Related Products
Related Products
Bolster R24, Nickel Silver
$10.00
Bolster R24, Nickel Silver Nickel Silver version of the bolster R24. The bolster is about 24 x 17 mm and 3 mm thick with a 2 mm slit. These are stamped out and most blade/bolster combinations...
Bolster R24, brass
$10.00
Bolster R24, Brass Brass version of the bolster R24. The bolster is about 24 x 17 mm and 3 mm thick with a 2 mm slit. These are stamped out and most blade/bolster combina