Tools

EZESharp Blade Sharpening System  (Deluxe-Pack) Industrial-strength sharpening system for professional butchers, chefs and sharpening businesses. This is the deluxe-pack which includes the EZESharp system, a quality Norton Bear IB8 combination stone...

EZESharp Blade Sharpener Canvas Cover by AOS 14oz heavy duty canvas cover designed and made in Australia, 230 x 230 mm For secure storage and permanent placement of the EZESharp blade sharpening system. AUSTRALIAN MADE AOS 14oz Grey Rip Stop Heavy Duty...

Norton Bear IB8 Combination Sharpening Stone 140/400 Grit This combination bench stone has one fine side and one coarse side abrasive. The IB8 is a great all-around, long-lasting stone and the one we include in the EZESharp Deluxe kit for consistent...

EZESharp Blade Sharpening System with 100 mm flip-over clamp Industrial-strength sharpening system for professional butchers, chefs and sharpening businesses. Use any standard size 2-3" wide sharpening stone for maximum flexibility Freely adjustable...

Nordic Edge Knife Honing Strop with Edge Polishing Compound For hair-poppingly sharp blades, strop after sharpening using this leather and wood paddle strap. The honing strap is 28 cm long, 1 cm thick and 4 cm wide in natural wood, with soft leather...

Micro-Mesh Set of 9 Sanding Pads for Knife Handle Finishing For the best results on wood, acrylic and micarta finish with Micro-mesh for a truly glossy finish. Size: 100 x 75 x 5 mm each, this set consists of 9 pads from 1500 to 12000 grit...

Kydex Pro Drill bit for 1/4" eyelets and rivets   Custom-made for perfect kydex sheath fittings, makes crisp and round holes removing the need to counter-sink. Kydex easily frays, this specialty drill bit is for making crisp holes in...

This Kydex Eyelet Flaring Set includes both the flaring die and guide tool, providing everything you need for clean and accurate installation of 1/4" eyelets. Fits standard 1/4" (6.3mm) Kydex eyelets Includes die and guide – complete set Machined...

Replacement Carbide Strips for the Knife Makers File Guide (v5) 80 x 10 x 3.7 mm carbide strips 2 x holes counter-sunk for M4 machines screws Hardened to 78 HRC One set of 2 carbide strips. These fit the "V4" and "v5" of the file guides, the type with...