Carbides for the v6 File Guide - (flat holes)

Replacement Carbide Strips for the Knife Makers File Guide (v6)

• 80 x 10 x 3.7 mm carbide strips
• 2 x holes counter-sunk for M4 machines screws
• Hardened to 78 HRC

One set of 2 carbide strips.

These fit the "V6" of the file guides, the latest model with flat bottomed holes so the carbides can be moved sideways if needed. 

Custom molded for the file guide, these screw on to the file guide body.

The carbides are very hard and should with normal use last for many years.

If they are used with diamond tools or ceramic belts if using a grinder, they can wear.

These are replacements strips and come with a new set of screws.