Cutlers Rivets Brass x 10
- Gift wrapping:
- Options available
Description
Cutlers Rivets x 10
Fits instead of 1/4" corby bolts in for instance the EnZo handle scales.
length total open 30 mm, closed 18 mm
diameter: 4.5 mm (hole through the blade)
head diameter: 7 mm (counter-sunk hole in scales, like for 1/4" bolts)
head thickness: 2 mm (male shaft)
1 Review
-
Great product in time and just what was required
Love the service love the products will be a return customer for sure
Related Products
Ivan
Glove Snaps 10 mm, brass finish, 10-pack
$9.00
10 mm Glove Snaps, Brass 10-pack snaps for gloves and similar applications, brass, 10 mm diameter.
$9.00
Ivan
Line 16 snaps, brass, 10-pack
$9.00
Line 16 snaps, brass finish, 10-pack snaps for leatherworking
$9.00
Brass Sheet, 1 x 120 x 240 mm
$26.00
Brass plate, 1 mm thick
Brass sheet or spacer material, approx 120 x 240 mm in size.
Used for spacer materials in handle construction, this is a single piece of brass approx one handle high and 6...
$26.00
Brass Guard, 31 x 15 x 1 mm
$12.00
Brass Guard, 31 x 15 x 1 mm in size Slit is 14.5 x 3 mm For use with stick tang blades
$12.00
Spacer material, Brass 40 x 40 x 1 mm
$6.00
Brass plate, 1 mm thick Brass spacer material, min 4x4 cm in size. These are stamped out and will need to be hammered flat before use. Drill a hole for the tang and insert these as spacers in between...
$6.00
Brass Guard Block, 100 mm (25 x 9.5 mm)
$15.00
Brass Guard Block (100 x 25.4 x 9.53 mm) Solid piece of brass used to make knife guards or bolsters, as well as end or butt caps. Machines freely and takes a great polish.
$15.00
Brass Guard Block, 200 mm (25 x 9.5 mm)
$25.00
Brass Guard Block (200 x 25.4 x 9.53 mm) Solid piece of brass used to make knife guards or bolsters, as well as end or butt caps. Machines freely and takes a great polish.
$25.00
Bolster R24, brass
$10.00
Bolster R24, Brass Brass version of the bolster R24. The bolster is about 24 x 17 mm and 3 mm thick with a 2 mm slit. These are stamped out and most blade/bolster combina
$10.00
Bolster R35, Brass
$12.00
Bolster R35, Brass (35 x 18 x 3 mm, slit 3 x 12 mm) Brass version of the bolster R35. Bolsters is an easy way to get a good looking fit between handle and blade. The handle piece can then have a...
$12.00