Ferric Chloride for Etching Steel
- Gift wrapping:
- Options available
Description
Ferric Chloride Powder
Mix with water to create etchant solution used to etch damascus steel.
300 grams of powdered ferric chloride mixed with 1 liter of destilled water makes 1 liter of "ferric solution".
This ferric solution is then diluted again with water to create the final etchant for the knife to be placed in.
We recommend using a gentle etching solution of 1:4.
Meaning 1 liter of ferric solution to 4 liters of water.
Example:
To make a total volume of 2 liters of etchant for steel, this takes 120 grams of powdered ferric and 1,6 l of distilled water.
Related Products
Related Products
Gator Piss Knife Steel Etchant
Baker Forge & Tool
$383.95
Gator Piss: The Ultimate Etching Solution
Transform your steelwork with Gator Piss, the pre-mixed, hassle-free etchant designed for flawless results every time.
Perfect for enhancing the intricate...
15N20 Nickel Steel
$179.82 - $286.75
15N20 Nickel Carbon steel
15N20 is popular with makers of damascus due to high nickel content of 2.0% which resist the etch and leaves shiny layers.
The steel IS NOT annealed and harder to work than...
14C28N Stainless Steel
Sandvik
$233.28 - $383.95
Stainless Knife Making Steel bar, 14C28N
Swedish Stainless Steel 14C28N from Alleima (formerly Sandvik until 2022), a popular stainless due to relative ease of heat treat and good edge...
Bowie Guard, Steel
Solingen
$140.94
Bowie Guard, Steel Brass guard for the Texas Bowie blade, this guard is 55 x 18 mm x 4 mm. The hole is about 11 x 5 mm and the ends are turned up.
Powdered Steel and Metals
$432.55 - $772.76
Powdered steel and other metals
Powdered steel and other metals used in damascus making, casting of mokume gane, casting of guards and other metal crafting projects.
Select material in Options for...