Bolsters And Guards

Bowie Guard, Steel Brass guard for the Texas Bowie blade, this guard is 55 x 18 mm x 4 mm. The hole is  about 11 x 5 mm and the ends are turned up.  

Stainless Steel Guard Block (200 x 25 x 10 mm) Solid piece of 316 grade stainless steel used to make knife guards or bolsters, as well as end or butt caps. Machines freely and takes a great polish. 316 is the same alloy as our 1/4" and 1/8" steel pins...

Big Guard 70 mm, Brass Brass guard for the Texas Bowie blade or other large blades, this guard is about 70 x 22 x 4 mm The hole is 4.8 x 12 mm and the guard is polished.  

Brass Guard Block (100 x 25.4 x 9.53 mm) Solid piece of brass used to make knife guards or bolsters, as well as end or butt caps. Machines freely and takes a great polish.

Brass Guard Block (200 x 25.4 x 9.53 mm) Solid piece of brass used to make knife guards or bolsters, as well as end or butt caps. Machines freely and takes a great polish.

Bolster V35, Brass (35 x 17 x 3 mm, slit 3 x 19 mm V shaped) Brass version of the bolster V35 with a V slit thinner in one end. Bolsters is an easy way to get a good looking fit between handle and blade. The handle piece can then have a bigger hole for...

Bolster V35, Nickel Silver (35 x 17 x 3 mm, slit 3 x 19 mm V shaped) Brass version of the bolster V35 with a V slit thinner in one end. Bolsters is an easy way to get a good looking fit between handle and blade. The handle piece can then have a bigger...

Bolster R35E, Brass (35 x 17 x 3 mm, slit 3.2 x 19 mm) Brass version of the bolster R35E. (note the Extended or longer slit than on the R35) Bolsters is an easy way to get a good looking fit between handle and blade. The handle piece can then have a...

Bolster R35E, Nickel Silver (35 x 17 x 3 mm, slit 3.2 x 19 mm) Nickel Silver version of the bolster R35E. (note the Extended or longer slit than on the R35) Bolsters is an easy way to get a good looking fit between handle and blade. The handle piece...

Bolster R24, Brass Brass version of the bolster R24. The bolster is about 24 x 17 mm and 3 mm thick with a 2 mm slit. These are stamped out and most blade/bolster combinations will need some work to fit together. Filing the sides of the blade tang...

Bolster R35, Brass (35 x 18 x 3 mm, slit 3 x 12 mm) Brass version of the bolster R35. Bolsters is an easy way to get a good looking fit between handle and blade. The handle piece can then have a bigger hole for the blade tang without this being...

Bolster R35, Nickel Silver (35 x 17 x 3 mm, slit 3 x 12 mm) Nickel Silver version of the bolster R35. Bolsters is an easy way to get a good looking fit between handle and blade. The handle piece can then have a bigger hole for the blade tang without...