Bolsters And Guards

Carbon Fiber Bolster Carbon fiber plates. Carbon fiber has exceptional strength, is lightweight and durable which make it a highly sought-after material. With their superior performance and stunning appearance, carbon fiber handles add a touch of...

Bolster R30, pre-shaped guard/front These stamped out bolsters save time when fitting a stick tang blade to the handle. Select brass, copper or nickel silver under Options. The bolster is about 30 x 19 mm and 3 mm thick, with a slit of approx 3.3 x 13 mm...

Bolster R44, Brass A bolster is like a thin guard, a front section between blade and handle materials on stick tang knives. This is a big version, the R44 that comes in either brass or nickel silver, see options. Note how big this bolster is, it is not...

Guard Brass - Excalibur Precision laser cut 5mm thick guard knife bolster. Size: 5x19x61mmHole: 3x18mm

Brass Guard Block (200 x 25.4 x 9.53 mm) Solid piece of brass used to make knife guards or bolsters, as well as end or butt caps. Machines freely and takes a great polish.

bolster for Appalachian Bowie Blade brass

Bolster 3580N, Nickel Silver  The bolster is about 30 x 19 mm and 3 mm thick, with a slit of 2 x 13 mm cut out. These are stamped out and most blade/bolster combinations will need some work to fit together. Filing the sides of the blade tang using a...

Bolster R30, Brass Brass version of the bolster R30. The bolster is about 30 x 19 mm and 3 mm thick, with a slit of 2 x 13 mm cut out. These are stamped out and most blade/bolster combinations will need some work to fit together. Filing the...

Bolster R3571N, Nickel Silver Nickel Silver version of the bolster 3571. The bolster is about 24 x 17 mm and 3 mm thick, with a slit of 3 x 13 mm cut out. These are stamped out and most blade/bolster combinations will need some work to fit together...

Brass Guard, 31 x 15 x 1 mm in size Slit is 14.5 x 3 mm For use with stick tang blades

Bolster V35, Nickel Silver (35 x 17 x 3 mm, slit 3 x 14 mm V shaped) Nickel Silver version of the bolster V35 with a V slit thinner in one end. The difference between V35 and "V35 Extended" is the length of the slit, 14 mm or 19 mm. Bolsters is an easy...

Bolster V35, Brass (35 x 17 x 3 mm, slit 3 x 14 mm V shaped) Brass version of the bolster V35 with a V slit thinner in one end. The difference between V35 and "V35 Extended" is the length of the slit, 14 mm or 19 mm. Bolsters is an easy way to get a good...