J-Flex Soft backing Belts (Finishing belts)
- Gift wrapping:
- Options available
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
Buy 6 or above | and get $2.00 off |
Description
J-Flex Grinding Belts for All-around use
Often used after stock removal (ceramic or cubitron) to blend and refine before either hand sanding, or going high grit on the grinder if not hand sanding. Comes from 120 (coarse) to 800 grit (very fine), in the 2 most popular knife making sizes 2 x 48" (50 x 1220 mm) and 2 x 72" (50 x 1830 mm).
Bulk price: get $2 off each belt when buying 6+ belts across grits.
J-Flex belts have soft, forgiving backing for grinding curves and flowing lines. Great for finish handles and blade transitions, often used over-hanging the platen 5 mm to create a rounded edge to grind against. J-flex is the soft backing, the actual abrasive is German-made aluminum oxide grits.
Will wear out quicker than the Ceramic and Zirconia belts, but very useful for finishing up and smoothing out curves before hand sanding.
the volume discount is across grits so adding different grits will automatically set bulk buy price when hitting the number of belts needed for the bulk prices.
1 Review
-
J-flex belts
I bought these to match with the small wheel set recently purchased & a plunge platen. They work well in both applications tho I haven't used them long enough to comment on their wear/longevity. But they do the job very well.