Loveless Bolts 1/4" - pack of 5
- MPN:
- 3704
- Gift wrapping:
- Options available
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
| Buy 3 or above | and pay only $20.00 each |
Description
Loveless bolts 1/4" (6.35 mm) - pack of 5
Strong way to attach scales to fulltang knife blades. Bolt is Stainless Steel with brass cylinders as "nuts".
Adjusts for handle width, epoxy thread and nut for extra strength, screw in screw.
When epoxy has cured, grind down bolt and brass sticking above handle scales for a clean, contrasting lock.
Cylinder diameter: 1/4" ( 6.35 mm),
Cylinder lenght: 7 mm (the brass nuts)
Screw: 3,8 mm , lenght 35 mm in 304 Stainless steel
Related Products
Related Products
Loveless Bolts 5/16" - pack of 5
$29.00
Loveless bolts 5/16" (8 mm) - pack of 5 Strong way to attach scales to fulltang knife blades. Bolt is Stainless Steel with brass cylinders as "nuts". Adjusts for handle width, epoxy thread and nut...
Corby Bolt 1/4", Copper
$3.50
Corby Bolt, Copper (1/4", 6.35 mm) Medium size corby bolt in copper, for securing handle scales to full-tang knife blades. These are often used in addition to epoxy glue, for both looks and...
Corby Bolt 1/4", Brass
$3.50
Corby Bolt, Brass (1/4", 6.35 mm) Medium size corby bolt in brass, for securing handle scales to full-tang knife blades. These are often used in addition to epoxy glue, for both looks and additional...
Corby Bolt 1/4", Stainless Steel
$3.50
Corby Bolt, Stainless Steel (1/4", 6.5 mm) Medium size corby bolt in steel, for securing handle scales to full-tang knife blades. These are often used in addition to epoxy glue, for both looks and...
Out of stock
Corby bolt drill w/counter sink 1/4"
$39.00
Corby Countersink with pilot drill bit, for 1/4" Corby Bolts Made in Germany, set for installing corby bolts of size 1/4" Comes with pilot drill 4.6 mm, and the "countersink" the short stubby drill...
Corby bolt drill w/counter sink 5/16"
$39.00
Corby Countersink with pilot drill bit, for 5/16" Corby Bolts, Loveless bolts etc Set for installing corby bolts of size 1/4" Comes with pilot drill 4.6 mm, and the "countersink" the short stubby...
Strap Cutter Blades, 5-pack
$19.00
Strap Cutter Blades, 5-pack For the strap cutter with wooden handle
Yellow 1/4" Kydex Eyelets for Sheath Making (#8-8), pack of 20
$15.00
Kydex Rivets or eyelets (1/4"), pack of 20 Flaring Eyelets for 2 mm kydex with 1/4" diameter#8-8These are the industry standard 1/4 inch diameter flaring eyelet/rivet used in making...
Brass 1/4" Kydex Eyelets for Sheath Making (#8-8), pack of 20
CKK
$15.00
Kydex Rivets or eyelets (1/4"), pack of 20 (Brass finish) Flaring Eyelets for 2 mm kydex with 1/4" diameter#8-8(Polished brass finish)These are the indust