Mora 95, Carbon Steel

Mora 95 Knife Blade           

 Carbon Steel blade, polished to a near mirror finish.

Mora blades are made in Mora,Sweden, the maker has over a century of history in making these blades.

The blade is made from carbon steel of high hardness laminated between sides of more flexible, softer steel.

This gives a very hard, sharp cutting edge (61 HRC), a strong flexible blade and allows for a thinner blade.

The blade blank is 2 mm thick, about 18 mm high and has about 95 mm of blade.

Total length from tip to end of tang is 175 mm, the tang can be cut to fit the handle if required.

Mora blades are well known amongst bushcrafters as good value, strong blades.

Note: if wanting the matching bolster, get the R24 in either brass or nickel silver.

Using a metal bolster makes for a clean, strong transition between blade and handle and an easier build.

 Here is an example of a great result by Nick from Havik Knives, using Australian Ironbark for the handle and with a custom-made brass guard:

https://nordicedge.com.au/knife-kits/