Polar
Polar Skinner 120, Stainless Steel
- Gift wrapping:
- Options available
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
| Buy 3 or above | and pay only $298.72 each |
Description
Polar 120 Skinner
Stainless Steel blade, with a Nordic hunter/skinner profile.
This blade is both longer and wider than most traditional Scandi blades, with a solid heavy feel to it.
Blade is from Finland, made by Polar in X50CrMoV15 Stainless Steel with a mirror finish.
The blade blank is 3.2 mm thick, about 27 mm high and has about 120 mm of blade.
Total length from tip to end of tang is 250 mm, the tang can be cut to fit the handle.
The Polar blades are stamped out, helping to keep the cost down.
This means you may need to file the tang and shoulders of the blade a little before the bolster will fit.
Being stainless steel, this blade is shinier than the carbon steel blades and can take more moisture before rusting.
Note: if wanting the matching bolster to use between the blade and handle, get the R44.
https://nordicedge.com.au/knife-kits/