Steel

Stainless Damascus billet in Waves pattern, 3 x 50 x 330mm. This pre-hardened stainless Damascus billet is made from two stainless steels, 9Cr18MoV and 10Cr15CoMoV, and is supplied already hardened and tempered to approximately 58–60 HRC. It...

San Mai Steel Billet for Knife Making: Carbon Steel Core with Stainless Damascus Cladding These billets consist of a core of SK5 (Japanese version of 1084) clad in 67 layers of stainless steel damascus for a stunning contrast when etched after grinding...

San Mai Steel Billet for Knife Making: Carbon Steel Core with Stainless Steel Cladding These billets consist of a core of SK5 (Japanese version of 1084) clad in 410 Stainless Steel for a stunning contrast when etched after grinding. Want a stunning...

12C27 Stainless Steel Bar Stock – Swedish Knife-Making Steel (Annealed) This 12C27 stainless steel bar stock is precision rolled and annealed, ready for your next knife-making project. Produced by Alleima (formerly Sandvik), 12C27 is a premium...

15N20 Nickel Carbon steel 15N20 is popular with makers of damascus due to high nickel content of 2.0% which resist the etch and leaves shiny layers. The steel IS NOT annealed and harder to work than our other carbon steels. 15N20 is a blade steel on it's...

ApexUltra - now in Australia! This is truly an exceptional steel from Austria and invented by Dr Larrin Thomas (the man behind Knifesteelnerds.com), Tobias Hangler (Austrian metallurgist and knife maker) and Marco Guldimann (knife maker from Switzerland)...

440C Stainless Blade Steel  High quality, high carbon Stainless Steel for blades, high in chromium for good corrosion resistance in the kitchen or marine use. 440C is a tough, "very stainless" steel - it is harder to grind than some of the other...