New
-
Carbides for the v6 File Guide - (flat holes)
Nordic Edge
£45.21Replacement Carbide Strips for the Knife Makers File Guide (v6) 80 x 10 x 3.7 mm carbide strips 2 x holes counter-sunk for M4 machines screws Hardened to 78 HRC -
20 kg Premium Bladesmith Anvil, Cast 6150 Steel
Nordic Edge
£136.6520 KG Cast Steel Blacksmith/Bladesmith Anvil See "options" for freight cost. Free freight to metro NSW/ACT/VIC/TAS/QLD/SA, $40-$100 elsewhere in Australia. Premium cast steel anvil in 6150... -
3 piece French Pricking Leather Stitching punch set
£14.733 piece French Pricking Leather Stitching punch set This French Pricking set consists of 2,5 and 10 prong chisels, all with 3.85mm spacing between each tip. The French pricking chisel provides... -
Out of stock
Taidea Rolling Knife Sharpener with 360-6000 grit stones
TAIDEA
£55.37TAIDEA Rolling Sharpening set with Sharpening Stones Easy to use set that gives professional results, includes full set of stones from 360-6000 grit. Very clever system where the knife is held at a...
Featured
-
-
Out of stock
-
-
Bestselling
-
-
Corby Bolt 1/4", Brass
£1.78 -
1084 - High Carbon Blade Steel
£7.62 - £146.81 -
New
-
-
-
-
Out of stock