Baker Forge Inferno GoCore – Coppermascus Damascus Billet (412 x 60.3 x 4.47 mm)

Introducing the Inferno GoCore by Baker Forge & Tool

Elevate your craftsmanship with the Inferno GoCore billet, a masterpiece combining aesthetic appeal and superior performance.

Key Features:

• Composition: 25-layer Damascus pattern with Coppermascus cladding, nickel shim, and 80CrV2 core.
• Finish: Flat ground and fully annealed for optimal workability.
• Dimensions: 412 x 60.3 x 4.47 mm (approx. 16.25 x 2.375 x 0.176 inches).
• Weight: Approximately 924 grams.
• Origin: Crafted in Mountain City, Tennessee, USA by Baker Forge & Tool

Note: Designed for stock removal processes. Forging is not recommended due to potential delamination between layers.

Experience the fusion of art and functionality with the Inferno GoCore billet.

-Heat treat like 80CrV2 (specific details below for this steel)

** This is an advanced, expensive steel with san mai construction. This is not a beginner-steel. There are no refunds for messing up the heat treatment and splitting them, or forging and delaminating the billets ***

Heat treating Baker Forge steel with 80CrV2 core:

• Normalize at 1600F (871 C) , 1500F (815 C), and 1400F (760 C) letting cool to black between each cycle.
• Heat to 1550 F (843 C)
• Hold for approx 10 mins for "knife blade thickness"
• Quench in warm quench oil (not Canola) 86 F-122F (30- 50 C)
• Temper immediately for 2 hours, cool in water and temper for another 2 hours (We recommend 392 F, 200 C)