Corby bolt drill w/counter sink 5/16"
- MPN:
- 7703
- Gift wrapping:
- Options available
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
| Buy 3 or above | and pay only €17.38 each |
Description
Corby Countersink with pilot drill bit, for 5/16" Corby Bolts, Loveless bolts etc
Set for installing corby bolts of size 1/4"
Comes with pilot drill 4.6 mm, and the "countersink" the short stubby drill bit special made for the shoulder of the Corby bolt at 5/16".
Related Products
Related Products
Out of stock
Corby bolt drill w/counter sink 1/4"
€23.37
Corby Countersink with pilot drill bit, for 1/4" Corby Bolts Made in Germany, set for installing corby bolts of size 1/4" Comes with pilot drill 4.6 mm, and the "countersink" the short stubby drill...
Corby Bolt 1/4", Brass
€2.10
Corby Bolt, Brass (1/4", 6.35 mm) Medium size corby bolt in brass, for securing handle scales to full-tang knife blades. These are often used in addition to epoxy glue, for both looks and additional...
Corby Bolt 1/4", Copper
€2.10
Corby Bolt, Copper (1/4", 6.35 mm) Medium size corby bolt in copper, for securing handle scales to full-tang knife blades. These are often used in addition to epoxy glue, for both looks and...
Corby Bolt 1/4", Stainless Steel
€2.10
Corby Bolt, Stainless Steel (1/4", 6.5 mm) Medium size corby bolt in steel, for securing handle scales to full-tang knife blades. These are often used in addition to epoxy glue, for both looks and...
Loveless Bolts 5/16" - pack of 5
€17.38
Loveless bolts 5/16" (8 mm) - pack of 5 Strong way to attach scales to fulltang knife blades. Bolt is Stainless Steel with brass cylinders as "nuts". Adjusts for handle width, epoxy thread and nut...
Loveless Bolts 1/4" - pack of 5
€17.38
Loveless bolts 1/4" (6.35 mm) - pack of 5 Strong way to attach scales to fulltang knife blades. Bolt is Stainless Steel with brass cylinders as "nuts". Adjusts for handle width, epoxy thread and nut...
Out of stock
Pops Drilling Jig, by Walter Sorrells
€137.24
Pops Drilling Jig
The Drilling Jig is a specialist tool for holding handle materials that are not flat up against the blade tang for easy, secure drilling of holes.
Walter Sorrell designed this tool...
Out of stock
Kydex pro drill for 1/4" Eyelets
€23.37
Kydex Pro Drill bit for 1/4" eyelets and rivets Custom-made for perfect kydex sheath fittings, makes crisp and round holes removing the need to counter-sink. Kydex easily frays, this...
Copper pin for handles 3/16"
€3.00
Copper Pin, 3/16" for handle pins (4.76 x 200 mm ) Copper pin for using in knife handles, this is for one pin of length approx 200 mm and with a diameter of 3/16" (4.76 mm). Using pins is a faster,...