Corby Bolts – Stainless Steel (Knife Handle Fasteners)

Corby Bolts – Stainless Steel (Knife Handle Fasteners)

Medium-strength mechanical fasteners used to secure handle scales to full-tang knife blades. Corby bolts are commonly used in addition to epoxy, helping provide a clean finished look and extra mechanical strength compared to standard pins.

Each Corby bolt consists of two threaded stainless steel pieces that screw together through the tang. Once tightened, the ends are ground flush with the handle scales for a neat, seamless finish.

Available in two sizes to suit different handle thicknesses and knife styles.

Size options & dimensions

1/4" (6.35 mm) Corby Bolt – Stainless Steel

• Outer diameter (end pieces): 6.35 mm (1/4")
• Centre section diameter: 4.6 mm
• Total length: 25 mm
• Each shoulder: 8 mm
• Middle section: 9 mm
• Adjustable: screws out to approx 13 mm middle section (adds up to ~4 mm if not tightened fully)
• Slotted ends for screwdriver tightening

Best suited for standard to thicker knife handles.

4 mm Corby Bolt – Stainless Steel

• Outer diameter (end pieces): 4 mm
• Centre section diameter: 3 mm
• Total length: approx 23 mm
• Section lengths: approx 7.75 mm / 7.75 mm / 7.75 mm
• Slotted ends for screwdriver tightening

Ideal for slim handles, smaller knives, and finer builds where a lower-profile fastener is preferred.