Damascus 25 Layer 1084/15N20
- Gift wrapping:
- Options available
Description
Damascus 25 Layer 1084/15N20 Billets from Standen Knives
stunning damascus billets made in Australia by Dane Standen.
- 25 layer carbon steel damascus
- 1084 & 15N20
These require care when using, like grinding bevels on all edges before heat treatment to reduce the chance of any issues in the quench.
They do however make a stunning blade for those who can handle them!
Heat treat like 1084 carbon steel, then etch in ferric chloride and then coffee.
Related Products
Related Products
How to: Heat Treat 1084, 1075 or 15N20 Carbon Steel
$0.00
How To Heat Treat Simple Carbon Steels:
** Recipe for 1084, 1075, 15N20 and 5160 **
The short version:
Heat the steel to non-magnetic any way you can (815 C / 1500 F)
15N20 Nickel Steel
$37.00 - $59.00
15N20 Nickel Carbon steel
15N20 is popular with makers of damascus due to high nickel content of 2.0% which resist the etch and leaves shiny layers.
The steel IS NOT annealed and harder to work than...
1084 - High Carbon Blade Steel
$15.00 - $289.00
1084 High Carbon Steel
15% discount when buying 3+ pieces (across sizes or from the same size)
The most popular carbon steel for knife makers is probably 1084 Carbon Steel, due to...
1084, HARDENED Carbon Steel, 58-60 HRC
$35.00 - $54.00
1084 High Carbon Steel PRE-HARDENED and TEMPERED, ready to be ground into blades.
Approx 56-60 HRC
1084 is a very popular high carbon steel with knife makers.
These will be difficult to drill due to...
San Mai Billets: 1084, Nickel, Carbon 1020
Oblivion
$129.00
San Mai Billets from Oblivion Blades, Made in Australia These are made to be forged and are as such not flat as monosteel bar stock. The billets are made by Jerarmie Heywood from Oblivion Blades and...