Handle Pins And Bolts

Stainless Steel Lanyard Tube, 1/4" for handle pins (6.35 x 145 mm ) Steel lanyard tube for using in knife handles, this is for one pin of length approx 145 mm and with a outside diameter of 1/4" (6.35 mm). These have a thicker wall than the brass lanyard...

Brass Lanyard Tube, 1/4" for handle pins (6.35 x 145 mm ) Brass lanyard tube for using in knife handles, this is for one pin of length approx 145 mm and with a outside diameter of 1/4" (6.35 mm). Brass is an easy to work material, and takes a great shine...

Brass Handle Pin, 1/8" (3.2 mm x 280 mm) Brass solid pin for using in knife handles, this is for one pin of length approx 28 cm and with a diameter of 1/8". 416 is a grade of stainless steel that is freely machinable, meaning it is easy to work and...

Stainless Steel Pin, 1/4" for handle pins (6.35 x 145 mm ) 316 Grade Stainless Steel  pin for using in knife handles, this is for one pin of length approx 145 mm and with a diameter of 1/4" (6.35 mm). Using pins is a faster, easier alternative to...

Brass Lanyard Tube, 1/4" For EnZo blades, lanyard tube for knife making. Size is 1/4", 6.35 mm as outer diameter. Length 22 mm, inner diameter 4.9 mm. Both outside and inside edges of the tube is chamfered. these are the ones used in for instance the...

Copper Pin, 1/8"  Copper pin for using in knife handles, this is for one pin of length approx 28 cm and with a diameter of 1/8". Copper is an easy to work material, and takes a great shine. Drill a 1/8" (3.2 mm) hole in the handle block or scales,...

Brass Pin, 1/4" for handle pins (6.35 x 145 mm ) Brass  pin for using in knife handles, this is for one pin of length approx 145 mm and with a diameter of 1/4" (6.35 mm). Using pins is a faster, easier alternative to corby bolts, resulting in the...

316 Stainless Steel Pin, 1/8"  Stainless Steel pin for using in knife handles, this is for one pin of length approx 28 cm and with a diameter of 1/8". 316 is a highly corrosive resistance alloy good for pins and fittings, the same as the guard...

Corby Bolt, Stainless Steel (1/4", 6.5 mm) Medium size corby bolt in steel, for securing handle scales to full-tang knife blades. These are often used in addition to epoxy glue, for both looks and additional attachment strength of the handle scales. The...

Corby Bolt, Brass (1/4", 6.35 mm) Medium size corby bolt in brass, for securing handle scales to full-tang knife blades. These are often used in addition to epoxy glue, for both looks and additional attachment strength of the handle scales. The bolt has...