unbranded
Mosaic Pin 513, 5 mm
- Gift wrapping:
- Options available
- Shipping:
- Calculated at Checkout
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
Buy 3 or above | and pay only $25.00 each |
$29.00
Description
5 mm Mosaic Pin (5 mm diameter x 130 mm)
Clean, good looking pattern Mosaic pin for knife handles consisting of an outer tube filled with smaller rods and black epoxy.
Drill a hole through handle and attach a short length with epoxy, sticking out a couple of mm on each side.
When the epoxy is set, grind off flush with the handle using a file or belt sander.
These are 130 mm long, and outer diameter is 5 mm.
Related Products

unbranded
Mosaic Pin 509, 5 mm
$29.00
5 mm Mosaic Pin in Steel and Brass (5 mm diameter x 130 mm)
Clean, good looking pattern Mosaic pin for knife handles consisting of an outer tube filled with smaller rods and black epoxy.
Drill a...
$29.00
unbranded
Mosaic Pin 511, 5 mm
$29.00
5 mm Mosaic Pin in Copper and Brass (5 mm diameter x 130 mm)
Clean, good looking pattern Mosaic pin for knife handles consisting of an outer tube filled with smaller rods and black epoxy.
Drill a...
$29.00
unbranded
Mosaic Pin 512B, 5 mm
$29.00
5 mm Mosaic Pin in Copper, Brass and Steel (5 mm diameter x 130 mm)
Clean, good looking pattern Mosaic pin for knife handles consisting of an outer tube filled with smaller rods and black epoxy...
$29.00

unbranded
Mosaic Pin 514, 5 mm
$29.00
5 mm Mosaic Pin (5 mm diameter x 130 mm)
Clean, good looking pattern Mosaic pin for knife handles consisting of an outer tube filled with smaller rods and black epoxy.
Drill a hole through handle...
$29.00

unbranded
Mosaic Pin 518, 5 mm
$29.00
5 mm Mosaic Pin (5 mm diameter x 130 mm)
Clean, good looking pattern Mosaic pin for knife handles consisting of an outer tube filled with smaller rods and black epoxy.
Drill a hole through handle...
$29.00
Customers Also Viewed

Brass pin for handles, 1/4"
$8.00
Brass Pin, 1/4" for handle pins (6.35 x 145 mm )
Brass pin for using in knife handles, this is for one pin of length approx 145 mm and with a diameter of 1/4" (6.35 mm).
Using pins is a...
$8.00


G10 handle pins, Imperial sizes
$7.00
G10 Pins for handles (1/8" or 1/4" or 3/16" )
Select colour and diameter in options
G10 pin for using in knife handles, this is for one pin of length approx 300 mm and with a diameter of 1/8"...
$7.00
Out of stock


Oblivion
San Mai Billets: Cu Mai (1084, Nickel, Copper, 1020)
$189.00
Cu Mai San Mai Billets from Oblivion Blades, Made in Australia
These are made to be forged and are as such not flat as monosteel bar stock.
The billets are made by Jerarmie Heywood from Oblivion...
$189.00

Carbon Fiber Rod 5 mm
$19.00
Carbon Fiber Rod 5 mm ( 5 x 250 mm)
Carbon fiber rod or pin stock, for using with carbon fiber scalesblack in colour
$19.00


Instructions - Stinger Framelock Kit
$0.00
Instructions for Stinger Framelock Folder Kit
**** NOTE: The Stinger does not have a pocket clip, unlike the early model in the instruction video ****
Tools required: Torx T5 and...
$0.00

Brass pin for handles, 1/8"
$8.00
Brass Handle Pin, 1/8" (3.2 mm x 280 mm)
Brass solid pin for using in knife handles, this is for one pin of length approx 28 cm and with a diameter of 1/8".
416 is a grade of stainless steel...
$8.00


Blacksmith Fly Press, 6 tons
$2,300.00
Fly press 6 ton, cast steel
Blacksmith fly press, 6 ton Steel flypress at good weight for forging.
With flywheel, one handle, 2 clamps for holding the work down. For a very efficient flypress...
$2,300.00

Bohler Uddeholm
Böhler M390 microclean 3.5x40x500mm
$159.00
Böhler M390 microclean 3.5x40x500mm
M390 Microclean by Böhler is a stainless powder steel. M390 is know for its cutting edge performance, high corrosion resistance and moderate toughness...
$159.00

Crocodile Bowie
$99.00
Crocodile Bowie
This tremendous 40cm overall length Bowie will get everyone's attention! A showpiece or an impressive hunting-survival knife. 440C stainless steel clip point blade 25cm long x 4.75cm...
$99.00


NKD
NKD Forester 100 Knife Kit with Curly Birch Scales, Scandi Grind 80CrV2
$119.00
Nordic Knife Design Forester 100 Knife Making Kit
NKD is the knife brand of Dennis Holmbacka from Finland, mixing old Finnish knife traditions with new advancements in steel and design. The result...
$119.00