unbranded
Mosaic Pin 514, 5 mm
- Gift wrapping:
- Options available
- Shipping:
- Calculated at Checkout
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
Buy 3 or above | and pay only $25.00 each |
$29.00
Description
5 mm Mosaic Pin (5 mm diameter x 130 mm)
Clean, good looking pattern Mosaic pin for knife handles consisting of an outer tube filled with smaller rods and black epoxy.
Drill a hole through handle and attach a short length with epoxy, sticking out a couple of mm on each side.
When the epoxy is set, grind off flush with the handle using a file or belt sander.
These are 130 mm long, and outer diameter is 5 mm.
Related Products

unbranded
Mosaic Pin 509, 5 mm
$29.00
5 mm Mosaic Pin in Steel and Brass (5 mm diameter x 130 mm)
Clean, good looking pattern Mosaic pin for knife handles consisting of an outer tube filled with smaller rods and black epoxy.
Drill a...
$29.00
unbranded
Mosaic Pin 511, 5 mm
$29.00
5 mm Mosaic Pin in Copper and Brass (5 mm diameter x 130 mm)
Clean, good looking pattern Mosaic pin for knife handles consisting of an outer tube filled with smaller rods and black epoxy.
Drill a...
$29.00
unbranded
Mosaic Pin 512B, 5 mm
$29.00
5 mm Mosaic Pin in Copper, Brass and Steel (5 mm diameter x 130 mm)
Clean, good looking pattern Mosaic pin for knife handles consisting of an outer tube filled with smaller rods and black epoxy...
$29.00

unbranded
Mosaic Pin 513, 5 mm
$29.00
5 mm Mosaic Pin (5 mm diameter x 130 mm)
Clean, good looking pattern Mosaic pin for knife handles consisting of an outer tube filled with smaller rods and black epoxy.
Drill a hole through handle...
$29.00

unbranded
Mosaic Pin 518, 5 mm
$29.00
5 mm Mosaic Pin (5 mm diameter x 130 mm)
Clean, good looking pattern Mosaic pin for knife handles consisting of an outer tube filled with smaller rods and black epoxy.
Drill a hole through handle...
$29.00
Customers Also Viewed


G10 handle pins, Imperial sizes
$7.00
G10 Pins for handles (1/8" or 1/4" or 3/16" )
Select colour and diameter in options
G10 pin for using in knife handles, this is for one pin of length approx 300 mm and with a diameter of 1/8"...
$7.00
Out of stock

Copper pin for handles 3/16"
$8.00
Copper Pin, 3/16" for handle pins (4.76 x 200 mm )
Copper pin for using in knife handles, this is for one pin of length approx 200 mm and with a diameter of 3/16" (4.76 mm).
Using pins is a faster,...
$8.00

Mosaic Pin 602, 6 mm
$29.00
6 mm Mosaic Pin (6 x 130 mm)
Clean, good looking pattern Mosaic pin for knife handles.
Drill a hole through handle and attach a short length with epoxy, sticking out a couple of mm on each side...
$29.00

Kitchen Cleaver Knife Making Kit with Handle Materials
$98.00
Kitchen Cleaver Knife Making Kit
Stainless steel cleaver blade and handle materials for making your own custom handled cleaver.
With a convex edge grind and satin finished blade as well as an extra...
$98.00

unbranded
Mosaic Pin 404, 4 mm.
$29.00
4 mm Mosaic Pin in Steel and Brass (4 mm diameter x 130 mm)
Clean, good looking pattern Mosaic pin for knife handles consisting of an outer tube filled with smaller rods and black epoxy.
Drill a...
$29.00

unbranded
Mosaic Pin 710, 7 mm
$35.00
7 mm Mosaic Pin in Brass and Steel (7 mm diameter x 130 mm)
Clean, good looking pattern Mosaic pin for knife handles consisting of an outer tube filled with smaller rods and black epoxy.
Drill a...
$35.00


Corby Bolt 1/4", Copper (20 bolts)
$40.00
Corby Bolt, Copper (1/4", 6.35 mm) (bag of 20 bolts)
Medium size corby bolt in copper, for securing handle scales to full-tang knife blades.
These are often used in addition to epoxy glue, for both...
$40.00
Out of stock

Bohler Uddeholm
ELMAX Stainless Blade Steel, 2.5x40x500 mm
$119.00
ELMAX Stainless Blade Steel, 2.5x40x500 mm
Elmax is a powder metallurgy stainless steel created by Bohler-Uddenholm. It is corrosive resistant due to its high Chromium percentage. It also has...
$119.00


Carbon Knife Steel 1084, 2 x 38 x 1000 mm
$29.00
Knife Making Steel bar, 1084 Carbon Steel in 2 x 38-40 x 1000 mm
The most popular carbon steel for new makers is probably 1084 Carbon Steel, due to ease of heat treatment.
The blade can...
$29.00
Out of stock

Brass pin for handles, 3/16"
$8.00
Brass Pin, 3/16" for handle pins (4.76 x 200 mm )
Brass pin for using in knife handles, this is for one pin of length approx 200 mm and with a diameter of 3/16" (4.76 mm).
Using pins is a...
$8.00