Stainless VG10 7-Layer Steel Billet

Stainless Steel San Mai Billet, Hardened and Tempered, HRC 58

"San mai" means the billet consists of a layered set of steels, not unlike a sandwich.

The core of the billet is 10Cr15CoMoV, a clone of the Japanese VG10 steel. This will etch black after grinding. Then on each side of the core steel, there is another 3layers of steel of 2 different grades. 

The cladding layers are 316 and 5Cr15MoV.

The result is 4 layers visible on each side of the knife, these layers will show up as different colours when etched.

Size: 3 x 50 x 330 mm.

Note these are PRE-HARDENED to approx 58 HRC and will be very difficult to work with hand tools.

These billets are stainless steel and make a great blade.

These are not to be heat treated, only to be used for stock removal. Take care to keep dunking in water while grinding to not ruining the temper.

After grinding and sanding, these can be etched in either ferric chloride or hydrochloric acid to make the 2 different steel types show up with different colours. Some bars are "very stainless" and you need the hydrochloric acid and longer time before you get a proper pattern, while others etch well in Ferric chloride alone.