Bottom Block Tool for Anvil, 1" shank
- Gift wrapping:
- Options available
Description
Bottom block tool with 1" shank
Anvil tool for blacksmithing, may need some final filing or grinding to fit the anvil. About 1" shank, cast steel tool.
about 50 x 50 mm face, 45 mm high. weights about 1.1 kg
Drops into the hardy hole for a small, raised flat surface to hammer against, or as a step where the anvil does not have one already.
Also handy for smaller, finer work.
1 Review
-
Bottom block tool
While there there was an issue with the first one nordic edge rectified the issue immediately and sent out a replacent which I had in my hand within 24 hours which was impressive. In general Nordic edge is good company to deal with with.
Related Products
Out of stock
Hot Cut Tool for Anvil, 1" shank
$35.69
Hot cut tool with 1" shank Anvil tool for blacksmithing. About 1" shank, cast steel tool. The hot cut is used to cut steel to length or width, as well as creating slits in hot steel. about 55 x 40 x...
$35.69
Bottom Fuller, 1" shank
$40.23
Bottom Fuller tool with 1" shank Anvil tool for blacksmithing, may need some final filing or grinding to fit the anvil. About 1" shank, cast steel tool. About 50 x 40 x 140 mm in size about 8 mm...
$40.23
Ivan
6.3 mm (1/4") Eyelet Setter with Anvil
$12.33
6 mm Eyelet setter For 6 mm and 1/4" eyelets used for leather
$12.33
Ivan
4.2 mm (5/32") Eyelet Setter with Anvil
$12.33
Eyelet setter for 4.2 mm eyelets used in leather
$12.33
Nordic Edge
70 kg Premium Blacksmith Anvil, Cast 6150 Steel
$531.45
70 KG Cast Steel Blacksmith Anvil -The Troy
** Price is for pickup from Brookvale NSW, or we can arrange TNT shi
$531.45
Out of stock
Nordic Edge
40 kg Premium Blacksmith Anvil, Cast 6150 Steel
$303.69
40 KG Cast Steel Blacksmith Anvil -The Ethan
(Price is for Pickup from Brookvale, NSW 2100. We can ship with TNT to a depot nearest you, this is much cheaper than residential delivery)
Premium...
$303.69
Birdseye Maple Handle Block (Big blocks)
$25.31
Maple Wood knife block, with birdseye figure (Big Blocks) Maple is a pale wood, these are from the US. Some maple have very distinct patterns called "birdseye", these pieces are selected for the high...
$25.31
Ivan
French Edge Skiving Tool, 12.5 mm (1/2")
$29.20
French Edge Skiving Tool, 12.5 mm (1/2") For reducing the thickness of leather where the leather will be for instance bent, or to remove corners
$29.20
Out of stock
Bog Oak Block
$25.31
Ancient Bog Oak Handle Block Approximately 30x45x130 mm Oak that has been buried in a peat bog for
$25.31