Spacer Materials

Upgrade your knife handle build with a G10 Spacer Sheet for added strength, contrast, and style.These 2 mm thick G10 sheets are perfect for adding a clean visual separation between handle materials and the tang. Material: G10 Size: 2 mm x 120 mm x...

Nickel Silver Sheet, 1 mm thick Nickel silver sheet or spacer material, approx 120 x 240 mm in size. Used for spacer materials in handle construction, this is a single piece of nickel silver approx one handle high and 6 handle blocks wide. Nickel silver...

Copper plate, 1 mm thick Copper sheet or spacer material, approx 120 x 240 mm in size. Used for spacer materials in handle construction, this is a single piece of copper approx one handle high and 6 handle blocks wide. Copper transfers heat very well and...

Brass plate, 1 mm thick Brass sheet or spacer material, approx 120 x 240 mm in size. Used for spacer materials in handle construction, this is a single piece of brass approx one handle high and 6 handle blocks wide.  

This vulcanised fibre spacer material is commonly used in knife handle construction as a liner or spacer between handle materials, bolsters or guards. Vulcanised fibre is a dense, durable material that machines cleanly and adds strength while maintaining...

Add strength, style, and colour contrast to your next knife or tool project with these G10 spacer liners. Made from high-pressure fibreglass laminate, G10 is lightweight, durable, waterproof, and easy to work with – perfect for custom handle builds...

Upgrade your next knife-making project with a premium G10 spacer sheet in 1mm thickness and a large 120 x 240mm size — ideal for full tang knives, hidden tang handles, or other craft projects. Features: Material: G10 (fiberglass laminate) –...

Copper plate, 1 mm thick (40 x 40 mm) Copper spacer material, min 4x4 cm in size. These are cut out  and may need to be hammered flat before use. Drill a hole for the tang and insert these as spacers in between pieces of wood or other handle...

Nickel silver plate, 1 mm thick, suitable for use as spacer material. Each piece is minimum 40 × 40 mm in size and supplied as stamped nickel silver.As these are stamped, the plates may require light hammering or flattening before use. Commonly...

Brass plate, 1 mm thick, suitable for use as spacer material or for making custom bolsters. Each piece is approximately 40 × 40 mm in size and supplied as stamped brass.As these are stamped, the plates may require light hammering or flattening...