Hardy Hot Cut Tool for Blacksmithing
- Gift wrapping:
- Options available
Description
Hardy Hot Cut Tool for Blacksmithing
Used in the hardy hole of an anvil to hot cut steel while forging.
Place the steel on the hot cut and hit it with a hammer - stopping before your hammer touches the edge - then break off the end with another pair of tongs.
Comes in 2 sizes, shank roughly 3/4" (approx 20 x 20 mm) or 1" (approx 26 x 26 mm) shank.
cast hot cut tool, shank size is rough and it will need to be cleaned up or ground to exact size for your anvil.
These are not hardened, use them for hot steel and do not hit it with a hammer.
Related Products
Out of stock
Hot Cut Tool for Anvil, 1" shank
$55.00
Hot cut tool with 1" shank Anvil tool for blacksmithing. About 1" shank, cast steel tool. The hot cut is used to cut steel to length or width, as well as creating slits in hot steel. about 55 x 40 x...
$55.00
Blacksmithing Punches
$45.00
Blacksmithing punches Different punches and slitting tools for blacksmithing. Bulk pricing for 3+ items. Note the punch tongs are $55/each, the other tools $45/each. Buying 3+ across the range takes...
$45.00
Nordic Edge
Blacksmithing Workshop (Sydney)
$329.00
Blacksmithing Workshop, 12 - 6 pm Location: Brookvale, NSW 2100 (Northern Beaches, Sydney) Come spend a Saturday with us on this practical introduction to Blacksmithing, and go home with your very...
$329.00
Out of stock
Round Hand Punch for Blacksmithing
$55.00
Round hand punch for blacksmithing Longer hand punch for blacksmithing to make holes and start drifting out. About 10 mm at the face and about 30 mm at the widest round end, the handle itself is...
$55.00
Nordic Edge
3 hour Blacksmithing Experience Workshop
$149.00
3 hour Blacksmithing Experience / Teamwork activity Arranged one Saturday night per month, or at other times for private groups of 4-8 people. ** Shorter version of the Blacksmithing...
$149.00