null

ST Power Hammer STH-15, 15 KG

(No reviews yet) Write a Review
Gift wrapping:
Options available
  • ST Power Hammer STH-15, 15 KG
  • ST Power Hammer STH-15, 15 KG
  • ST Power Hammer STH-15, 15 KG
  • ST Power Hammer STH-15, 15 KG
  • ST Power Hammer STH-15, 15 KG
  • ST Power Hammer STH-15, 15 KG
  • ST Power Hammer STH-15, 15 KG
  • ST Power Hammer STH-15, 15 KG
  • ST Power Hammer STH-15, 15 KG
  • ST Power Hammer STH-15, 15 KG
£5,117.31

Description

ST Power Hammer 15 KG, STH-15

 

** Note this product does not have free freight **

ST Power Hammer with 15 kg ram weight for forging steel. This is a small industrial model for knife makers and for finer blacksmithing work.

The STH-15 is a popular entry-level power hammer as it plugs into a standard Australian 240 V power outlet without needing a VFD or larger dedicated circuit.

Not requiring a dedicated foundation, this model can be moved around should that be necessary.

Strong cast iron frame, hardened dies in 5CrMnMo for excellent wear resistance.

These are the new Advanced series power hammers from ST with heavier cast frames and upgraded bushings for less vibration and longer working life.

Each ST Power Hammer is inspected, tested and run in Australia before being shipped out.

  • Wiring replaced for Australian compliance
  • VDF mounted to motor guard in enclosure
  • On/off button + Emergency off switch mounted
  • Greased, oiled and test run for 4 hours (HALF of the required run-in time before any heavy forging should be done)

Specs of the industrial machine:

Ram weight: 15 kg

Hitting frequency: 300 hits/min

Capacity: Square 30 x 30 mm, Round 35 mm diameter steel

Distance between dies: 160 mm

Throat Depth: 170 mm

Motor: 2.2 KW - runs on a 240 V single phase standard Australian outlet, 20Amp circuit is recommended.

Dies: One set of parallell steel dies included.

Weight: 540 kg incl base

Power hammer dimensions: 1600 mm high, 1200 mm long body, 640 mm wide.

Packing Size: 1280 x 720 x 1780 mm, packed weight 610 kg in crate.

 Freight:

Freight: will be invoiced separately and is not included in the displayed price

The power hammer can be picked up from Brookvale, NSW 2100 or Nordic Edge can assist with freight quote, oncharging actual cost of freight.  Nordic Edge is the ST Power Hammer dealer for south-eastern Australia only at this point, contact us for options in other states.

Quality control and running in:

Each power hammer is going through the quality assurance and running-in process in Australia before being sent out to the customer.

This ensures a faster, simpler setup at customer site and the assurance that the power hammer will work straight out of the box.

  • inspected by certified NSW electrician
  • greased, oiled and inspected by experienced power hammer operator in Sydney
  • Run-in period of at least 4 hours in Sydney to ensure everything is working as expected, including forging and idle run
  • Re-packaged into wooden crate, ready for transport to customer site
  • Wiring replaced to company with Australian standards
  • VFD mounted in box on motor cover in a "no touch" config, no need to adjust or touch VFD
  • On/Off switch and Emergency Off on side of machine

Support:

  • Documentation for electric circuit and any foundation requirements over email and phone
  • Phone consultation on freight options, install requirements, any foundation or electrical work required at customer's cost
  • Phone and video call support as required to install, initial start-up checks and first forging
  • Phone and video call support as required in the 24 month warranty period for faults
  • Ongoing phone and video support at additional cost after warranty period if required
  • In NSW and VIC we can provide support and basic operator instructions at additional cost, at your location

Important: Read and follow the advice in this article for running in period, maintenance and operation: LINK

Payment options:

  1. Pay power hammer in full online with additional freight invoice before shipping.
  2. Pay 20% deposit, pay reminder on invoice with final freight cost all in one.
  3. Price is for pickup from Brookvale, NSW 2100. We can arrange freight at your cost.
  4. Freight cost will vary based on post code and if you have forklift available to unload the truck. 

About ST Power Hammers:

Many power hammers in China are based on the classic Russian STANKO model, having been developed in the Soviet Union and then advanced over many years by several different companies as technology upgrades in materials and processing machinery evolved.

The ST Power hammers are made by a Chinese brand “ST Anyang Power Hammers”, originally started by former employees from a larger power hammer manufacturer callled "“Anyang FP” also based in Anyang, China. After a difficult start arguing with Anyang FP about copying their copy of the STANKO, the ST Power hammers now marketed are the Advanced series developed by ST and not the standard “Economy” model initially made.

Being a smaller manufacturer the ST Power Hammer company has been able to rapidly upgrade their model range, and today offer a series of advantages over the old model:

  • Heavier cast frames by 8-10% for increased strength and reduced vibration
  • Single-piece cast piston for longer life and less wear
  • Steel bushing rather than copper on connecting rod for improved working life
  • More robust oiler for consistent lubrication with less need for adjustments

Nordic Edge is the ST Power Hammer dealer for NSW and VIC, having serviced the knifemaking and blacksmithing industry in Australia since 2015 and having built a solid reputation for high customer satisfaction. Nordic Edge is based in Brookvale on the Northern Beaches of Sydney, supplying anvils, tongs, steel, hammers and other related products for knife makers, blacksmiths and other metal workers. 

 

View AllClose

Videos Hide Videos Show Videos