Stainless VG10 San Mai Steel Billet

Stainless Steel San Mai Billet, Hardened and Tempered, HRC 58

"San mai" means the billet consists of a layered set of steels, not unlike a sandwich.

The core of the billet is 10Cr15CoMoV, a clone of the Japanese VG10 steel. This will etch black after grinding, with cladding in 316 Stainless Steel and pure nickel  

Size: 3 x 50 x 330 mm.

So on each side of the core steel, there is another single layer of stainless steel for a total of 3 layers of steel- this is called "San Mai" plus one layer of pure nickel in between for a total of 5 layers if counting the nickel  

Note these are PRE-HARDENED to approx 58 HRC and will be very difficult to work with hand tools.

These billets are stainless steel and make a great blade.

These are not to be heat treated, only to be used for stock removal. Take care to keep dunking in water while grinding to not ruining the temper.

After grinding and sanding, these can be etched in either ferric chloride or hydrochloric acid to make the 2 different steel types show up with different colours. Some bars are "very stainless" and you need the hydrochloric acid and longer time before you get a proper pattern, while others etch well in Ferric chloride alone.