15N20 Nickel Steel
- MPN:
- 80207
- Gift wrapping:
- Options available
Description
15N20 Nickel Carbon steel
15N20 is popular with makers of damascus due to high nickel content of 2.0% which resist the etch and leaves shiny layers.
The steel IS NOT annealed and harder to work than our other carbon steels.
15N20 is a blade steel on it's own, bascially 1075 with nickel added but is usually combined with a carbon steel like 1084 into damascus over being used as-is. The nickel makes the steel tougher than "plain" 1075.
Related Products
Related Products
How to: Heat Treat 1084, 1075 or 15N20 Carbon Steel
£0.00
How To Heat Treat Simple Carbon Steels:
** Recipe for 1084, 1075, 15N20 and 5160 **
The short version:
Heat the steel to non-magnetic any way you can (815 C / 1500 F)
San Mai Billets: Aogami Super Carbon Steel, Nickel, Iron Cheeks
Oblivion
£96.97
San Mai Billets from Oblivion Blades, Made in Australia These are made to be forged or at least flattened by hammer, and are as such not flat as monosteel bar stock. The billets are made by Jerarmie...
Bolster R35E, Nickel Silver
£5.97
Bolster R35E, Nickel Silver (35 x 17 x 3 mm, slit 3.2 x 19 mm) Nickel Silver version of the bolster R35E. (note the Extended or longer slit than on the R35) Bolsters is an easy way to get a good...
Bolster 3571N, Nickel Silver
£5.97
Bolster R3571N, Nickel Silver Nickel Silver version of the bolster 3571. The bolster is about 24 x 17 mm and 3 mm thick, with a slit of 3 x 13 mm cut out. These are stamped out and most blade/
Bolster 3580N, Nickel Silver
£5.97
Bolster 3580N, Nickel Silver The bolster is about 30 x 19 mm and 3 mm thick, with a slit of 2 x 13 mm cut out. These are stamped out and most blade/bolster combinations will need some work to...
Bolster R24, Nickel Silver
£4.97
Bolster R24, Nickel Silver Nickel Silver version of the bolster R24. The bolster is about 24 x 17 mm and 3 mm thick with a 2 mm slit. These are stamped out and most blade/bolster combinations...
Bolster R35, Nickel Silver
£5.97
Bolster R35, Nickel Silver (35 x 17 x 3 mm, slit 3 x 12 mm) Nickel Silver version of the bolster R35. Bolsters is an easy way to get a good looking fit between handle and blade. The handle piece...
Bolster V35, Nickel Silver
£5.97
Bolster V35, Nickel Silver (35 x 17 x 3 mm, slit 3 x 14 mm V shaped) Nickel Silver version of the bolster V35 with a V slit thinner in one end. The difference between V35 and "V35 Extended" is the...
Bolster V35 Extended, Nickel Silver
£5.97
Bolster V35, Nickel Silver (35 x 17 x 3 mm, slit 3 x 19 mm V shaped) Brass version of the bolster V35 with a V slit thinner in one end. Bolsters is an easy way to get a good looking fit between...